Kontakter

Sockets är en dataöverföringsteknik på låg nivå där många nätverksprotokoll implementeras. Windows erbjuder TCP- och UDP-socketklasser för klient-server- eller peer-to-peer-program, oavsett om anslutningar är långlivade eller om en upprättad anslutning inte krävs.

Det här avsnittet fokuserar på hur du använder de Windows socketklasser som finns i Windows. Networking.Sockets-namnrymd. Men du kan också använda Windows Sockets 2 (Winsock) i en Windows-app.

Note

Till följd av nätverksisolering tillåter Windows inte upprätta en socketanslutning (Sockets eller WinSock) mellan två Windows appar som körs på samma dator, oavsett om det är via den lokala loopback-adressen (127.0.0.1) eller genom att uttryckligen ange den lokala IP-adressen. Mer information om mekanismer med vilka Windows appar kan kommunicera med varandra finns i App-till-app-kommunikation.

Skapa en grundläggande TCP-socketklient och -server

En TCP-socket (Transmission Control Protocol) tillhandahåller nätverksdataöverföringar på låg nivå i båda riktningarna för anslutningar som är långlivade. TCP-socketar är den underliggande funktionen som används av de flesta nätverksprotokoll som används på Internet. För att demonstrera grundläggande TCP-åtgärder visar exempelkoden nedan en StreamSocket och en StreamSocketListener som skickar och tar emot data via TCP för att bilda en ekoklient och server.

Till att börja med så få rörliga delar som möjligt – och för att kringgå problem med nätverksisolering för närvarande – skapar du ett nytt projekt och placerar både klienten och serverkoden nedan i samma projekt.

Du måste deklarera en appfunktion i projektet. Öppna apppaketets manifestkällfil ( Package.appxmanifest filen) och kontrollera privata nätverk (klient och server) på fliken Funktioner. Så här ser det ut i Package.appxmanifest-markeringen.

<Capability Name="privateNetworkClientServer" />

I stället för privateNetworkClientServer kan du ange internetClientServer, om du ansluter över internet. Både StreamSocket och StreamSocketListener behöver en eller annan av dessa appfunktioner för att deklareras.

En ekoklient och server med TCP-socketar

Skapa en StreamSocketListener och börja lyssna efter inkommande TCP-anslutningar. Händelsen StreamSocketListener.ConnectionReceived utlöses varje gång en klient upprättar en anslutning till StreamSocketListener.

Skapa även en StreamSocket, upprätta en anslutning till servern, skicka en begäran och ta emot ett svar.

Skapa en ny sida med namnet StreamSocketAndListenerPage. Placera XAML-markering i StreamSocketAndListenerPage.xamloch placera imperativkoden i StreamSocketAndListenerPage klassen.

<Grid Background="{ThemeResource ApplicationPageBackgroundThemeBrush}">
    <Grid.RowDefinitions>
        <RowDefinition Height="Auto"/>
        <RowDefinition Height="*"/>
    </Grid.RowDefinitions>

    <StackPanel>
        <TextBlock Margin="9.6,0" Style="{StaticResource TitleTextBlockStyle}" Text="TCP socket example"/>
        <TextBlock Margin="7.2,0,0,0" Style="{StaticResource HeaderTextBlockStyle}" Text="StreamSocket &amp; StreamSocketListener"/>
    </StackPanel>

    <Grid Grid.Row="1">
        <Grid.RowDefinitions>
            <RowDefinition/>
            <RowDefinition/>
        </Grid.RowDefinitions>
        <Grid.ColumnDefinitions>
            <ColumnDefinition Width="*"/>
            <ColumnDefinition Width="*"/>
        </Grid.ColumnDefinitions>
        <TextBlock Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="client"/>
        <ListBox x:Name="clientListBox" Grid.Row="1" Margin="9.6"/>
        <TextBlock Grid.Column="1" Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="server"/>
        <ListBox x:Name="serverListBox" Grid.Column="1" Grid.Row="1" Margin="9.6"/>
    </Grid>
</Grid>

// Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
// For this example, we'll choose an arbitrary port number.
static string PortNumber = "1337";

protected override void OnNavigatedTo(NavigationEventArgs e)
{
    this.StartServer();
    this.StartClient();
}

private async void StartServer()
{
    try
    {
        var streamSocketListener = new Windows.Networking.Sockets.StreamSocketListener();

        // The ConnectionReceived event is raised when connections are received.
        streamSocketListener.ConnectionReceived += this.StreamSocketListener_ConnectionReceived;

        // Start listening for incoming TCP connections on the specified port. You can specify any port that's not currently in use.
        await streamSocketListener.BindServiceNameAsync(StreamSocketAndListenerPage.PortNumber);

        this.serverListBox.Items.Add("server is listening...");
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.serverListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

private async void StreamSocketListener_ConnectionReceived(Windows.Networking.Sockets.StreamSocketListener sender, Windows.Networking.Sockets.StreamSocketListenerConnectionReceivedEventArgs args)
{
    string request;
    using (var streamReader = new StreamReader(args.Socket.InputStream.AsStreamForRead()))
    {
        request = await streamReader.ReadLineAsync();
    }

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add(string.Format("server received the request: \"{0}\"", request)));

    // Echo the request back as the response.
    using (Stream outputStream = args.Socket.OutputStream.AsStreamForWrite())
    {
        using (var streamWriter = new StreamWriter(outputStream))
        {
            await streamWriter.WriteLineAsync(request);
            await streamWriter.FlushAsync();
        }
    }

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add(string.Format("server sent back the response: \"{0}\"", request)));

    sender.Dispose();

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add("server closed its socket"));
}

private async void StartClient()
{
    try
    {
        // Create the StreamSocket and establish a connection to the echo server.
        using (var streamSocket = new Windows.Networking.Sockets.StreamSocket())
        {
            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            var hostName = new Windows.Networking.HostName("localhost");

            this.clientListBox.Items.Add("client is trying to connect...");

            await streamSocket.ConnectAsync(hostName, StreamSocketAndListenerPage.PortNumber);

            this.clientListBox.Items.Add("client connected");

            // Send a request to the echo server.
            string request = "Hello, World!";
            using (Stream outputStream = streamSocket.OutputStream.AsStreamForWrite())
            {
                using (var streamWriter = new StreamWriter(outputStream))
                {
                    await streamWriter.WriteLineAsync(request);
                    await streamWriter.FlushAsync();
                }
            }

            this.clientListBox.Items.Add(string.Format("client sent the request: \"{0}\"", request));

            // Read data from the echo server.
            string response;
            using (Stream inputStream = streamSocket.InputStream.AsStreamForRead())
            {
                using (StreamReader streamReader = new StreamReader(inputStream))
                {
                    response = await streamReader.ReadLineAsync();
                }
            }

            this.clientListBox.Items.Add(string.Format("client received the response: \"{0}\" ", response));
        }

        this.clientListBox.Items.Add("client closed its socket");
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.clientListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

#include <winrt/Windows.Foundation.h>
#include <winrt/Windows.Networking.Sockets.h>
#include <winrt/Windows.Storage.Streams.h>
#include <winrt/Microsoft.UI.Dispatching.h>
#include <winrt/Microsoft.UI.Xaml.Navigation.h>
#include <sstream>

using namespace winrt;
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Microsoft::UI::Dispatching;
using namespace Microsoft::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener m_streamSocketListener;
    Windows::Networking::Sockets::StreamSocket m_streamSocket;

public:
    void OnNavigatedTo(NavigationEventArgs const& /* e */)
    {
        StartServer();
        StartClient();
    }

private:
    IAsyncAction StartServer()
    {
        try
        {
            // The ConnectionReceived event is raised when connections are received.
            m_streamSocketListener.ConnectionReceived({ this, &StreamSocketAndListenerPage::OnConnectionReceived });

            // Start listening for incoming TCP connections on the specified port. You can specify any port that's not currently in use.
            // Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
            // For this example, we'll choose an arbitrary port number.
            co_await m_streamSocketListener.BindServiceNameAsync(L"1337");
            serverListBox().Items().Append(winrt::box_value(L"server is listening..."));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

    IAsyncAction OnConnectionReceived(Windows::Networking::Sockets::StreamSocketListener /* sender */, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs args)
    {
        try
        {
            auto socket{ args.Socket() }; // Keep the socket referenced, and alive.
            DataReader dataReader{ socket.InputStream() };

            unsigned int bytesLoaded = co_await dataReader.LoadAsync(sizeof(unsigned int));

            unsigned int stringLength = dataReader.ReadUInt32();
            bytesLoaded = co_await dataReader.LoadAsync(stringLength);
            winrt::hstring request = dataReader.ReadString(bytesLoaded);

            serverListBox().DispatcherQueue().TryEnqueue([=]()
            {
                std::wstringstream wstringstream;
                wstringstream << L"server received the request: \"" << request.c_str() << L"\"";
                serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
            });

            // Echo the request back as the response.
            DataWriter dataWriter{ socket.OutputStream() };
            dataWriter.WriteUInt32(request.size());
            dataWriter.WriteString(request);
            co_await dataWriter.StoreAsync();
            dataWriter.DetachStream();

            serverListBox().DispatcherQueue().TryEnqueue([=]()
            {
                std::wstringstream wstringstream;
                wstringstream << L"server sent back the response: \"" << request.c_str() << L"\"";
                serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
            });

            m_streamSocketListener = nullptr;

            serverListBox().DispatcherQueue().TryEnqueue([=]()
            {
                serverListBox().Items().Append(winrt::box_value(L"server closed its socket"));
            });
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().DispatcherQueue().TryEnqueue([=]()
            {
                serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
            });
        }
    }

    IAsyncAction StartClient()
    {
        try
        {
            // Establish a connection to the echo server.

            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            Windows::Networking::HostName hostName{ L"localhost" };

            clientListBox().Items().Append(winrt::box_value(L"client is trying to connect..."));

            co_await m_streamSocket.ConnectAsync(hostName, L"1337");
            clientListBox().Items().Append(winrt::box_value(L"client connected"));

            // Send a request to the echo server.
            DataWriter dataWriter{ m_streamSocket.OutputStream() };
            winrt::hstring request{ L"Hello, World!" };
            dataWriter.WriteUInt32(request.size());
            dataWriter.WriteString(request);

            co_await dataWriter.StoreAsync();

            std::wstringstream wstringstream;
            wstringstream << L"client sent the request: \"" << request.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));

            co_await dataWriter.FlushAsync();
            dataWriter.DetachStream();

            // Read data from the echo server.
            DataReader dataReader{ m_streamSocket.InputStream() };
            unsigned int bytesLoaded = co_await dataReader.LoadAsync(sizeof(unsigned int));
            unsigned int stringLength = dataReader.ReadUInt32();
            bytesLoaded = co_await dataReader.LoadAsync(stringLength);
            winrt::hstring response{ dataReader.ReadString(bytesLoaded) };

            wstringstream.str(L"");
            wstringstream << L"client received the response: \"" << response.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));

            m_streamSocket = nullptr;

            clientListBox().Items().Append(winrt::box_value(L"client closed its socket"));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

#include <ppltasks.h>
#include <sstream>
...
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Core;
using namespace Windows::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener^ streamSocketListener;
    Windows::Networking::Sockets::StreamSocket^ streamSocket;

protected:
    virtual void OnNavigatedTo(NavigationEventArgs^ e) override
    {
        this->StartServer();
        this->StartClient();
    }

private:
    void StartServer()
    {
        try
        {
            this->streamSocketListener = ref new Windows::Networking::Sockets::StreamSocketListener();

            // The ConnectionReceived event is raised when connections are received.
            streamSocketListener->ConnectionReceived += ref new TypedEventHandler<Windows::Networking::Sockets::StreamSocketListener^, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^>(this, &StreamSocketAndListenerPage::StreamSocketListener_ConnectionReceived);

            // Start listening for incoming TCP connections on the specified port. You can specify any port that's not currently in use.
            // Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
            // For this example, we'll choose an arbitrary port number.
            Concurrency::create_task(streamSocketListener->BindServiceNameAsync(L"1337")).then(
                [=]
            {
                this->serverListBox->Items->Append(L"server is listening...");
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

    void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
    {
        try
        {
            auto dataReader = ref new DataReader(args->Socket->InputStream);

            Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
                [=](unsigned int bytesLoaded)
            {
                unsigned int stringLength = dataReader->ReadUInt32();
                Concurrency::create_task(dataReader->LoadAsync(stringLength)).then(
                    [=](unsigned int bytesLoaded)
                {
                    Platform::String^ request = dataReader->ReadString(bytesLoaded);
                    this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                        [=]
                    {
                        std::wstringstream wstringstream;
                        wstringstream << L"server received the request: \"" << request->Data() << L"\"";
                        this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
                    }));

                    // Echo the request back as the response.
                    auto dataWriter = ref new DataWriter(args->Socket->OutputStream);
                    dataWriter->WriteUInt32(request->Length());
                    dataWriter->WriteString(request);
                    Concurrency::create_task(dataWriter->StoreAsync()).then(
                        [=](unsigned int)
                    {
                        dataWriter->DetachStream();

                        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                            [=]()
                        {
                            std::wstringstream wstringstream;
                            wstringstream << L"server sent back the response: \"" << request->Data() << L"\"";
                            this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
                        }));

                        delete this->streamSocketListener;
                        this->streamSocketListener = nullptr;

                        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->serverListBox->Items->Append(L"server closed its socket"); }));
                    });
                });
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message); }));
        }
    }

    void StartClient()
    {
        try
        {
            // Create the StreamSocket and establish a connection to the echo server.
            this->streamSocket = ref new Windows::Networking::Sockets::StreamSocket();

            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            auto hostName = ref new Windows::Networking::HostName(L"localhost");

            this->clientListBox->Items->Append(L"client is trying to connect...");

            Concurrency::create_task(this->streamSocket->ConnectAsync(hostName, L"1337")).then(
                [=](Concurrency::task< void >)
            {
                this->clientListBox->Items->Append(L"client connected");

                // Send a request to the echo server.
                auto dataWriter = ref new DataWriter(this->streamSocket->OutputStream);
                auto request = ref new Platform::String(L"Hello, World!");
                dataWriter->WriteUInt32(request->Length());
                dataWriter->WriteString(request);

                Concurrency::create_task(dataWriter->StoreAsync()).then(
                    [=](Concurrency::task< unsigned int >)
                {
                    std::wstringstream wstringstream;
                    wstringstream << L"client sent the request: \"" << request->Data() << L"\"";
                    this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));

                    Concurrency::create_task(dataWriter->FlushAsync()).then(
                        [=](Concurrency::task< bool >)
                    {
                        dataWriter->DetachStream();

                        // Read data from the echo server.
                        auto dataReader = ref new DataReader(this->streamSocket->InputStream);
                        Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
                            [=](unsigned int bytesLoaded)
                        {
                            unsigned int stringLength = dataReader->ReadUInt32();
                            Concurrency::create_task(dataReader->LoadAsync(stringLength)).then(
                                [=](unsigned int bytesLoaded)
                            {
                                Platform::String^ response = dataReader->ReadString(bytesLoaded);
                                this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                                    [=]
                                {
                                    std::wstringstream wstringstream;
                                    wstringstream << L"client received the response: \"" << response->Data() << L"\"";
                                    this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));

                                    delete this->streamSocket;
                                    this->streamSocket = nullptr;

                                    this->clientListBox->Items->Append(L"client closed its socket");
                                }));
                            });
                        });
                    });
                });
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

Referenser till StreamSockets i C++ PPL-fortsättningar (gäller främst C++/CX)

Note

Om du använder C++/WinRT-coroutines och skickar parametrar efter värde gäller inte det här problemet. Rekommendationer för parameteröverföring finns i Samtidighet och asynkrona åtgärder med C++/WinRT.

En StreamSocket förblir vid liv så länge det finns en aktiv läsning/skrivning på indata-/utdataströmmen (vi tar till exempel StreamSocketListenerConnectionReceivedEventArgs.Socket som du har åtkomst till i din StreamSocketListener.ConnectionReceived-händelsehanterare ). När du anropar DataReader.LoadAsync (eller ReadAsync/WriteAsync/StoreAsync) behåller den en referens till socketen (via socketens indataström) tills händelsehanteraren för LoadAsync-händelsen Completed (om det finns någon) har körts klart.

Parallel Patterns Library (PPL) schemalägger inte fortsättningar för aktiviteter direkt som standard. Med andra ord garanterar inte att lägga till en fortsättningsuppgift (med task::then()) att fortsättningsuppgiften körs direkt i slutförandehanteraren.

void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
{
    auto dataReader = ref new DataReader(args->Socket->InputStream);
    Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
        [=](unsigned int bytesLoaded)
    {
        // Work in here isn't guaranteed to execute inline as the completion handler of the LoadAsync.
    });
}

Ur StreamSocket:s perspektiv har slutförandehanteraren körts klart (och socketen kan kasseras) innan fortsättningsdelen körs. Så för att hålla din socket från att tas bort om du vill använda den i den fortsättningen, måste du antingen referera till socketen direkt (via lambda capture) och använda den, eller indirekt (genom att fortsätta att komma åt args->Socket inuti fortsättningar) eller tvinga fortsättningsuppgifter att vara infogade. Du kan se den första tekniken (lambda capture) i praktiken i StreamSocket-exemplet. C++/CX-koden i avsnittet Skapa en grundläggande TCP-socketklient och -server ovan använder den andra tekniken – den ekar begäran tillbaka som ett svar och den kommer args->Socket åt inifrån en av de innersta fortsättningarna.

Den tredje tekniken är lämplig när du inte upprepar ett svar tillbaka. Du använder alternativet task_continuation_context::use_synchronous_execution() för att tvinga PPL att köra fortsättningsdelen direkt. Här är ett kodexempel som visar hur du gör det.

void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
{
    auto dataReader = ref new DataReader(args->Socket->InputStream);

    Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
        [=](unsigned int bytesLoaded)
    {
        unsigned int messageLength = dataReader->ReadUInt32();
        Concurrency::create_task(dataReader->LoadAsync(messageLength)).then(
            [=](unsigned int bytesLoaded)
        {
            Platform::String^ request = dataReader->ReadString(bytesLoaded);
            this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                [=]
            {
                std::wstringstream wstringstream;
                wstringstream << L"server received the request: \"" << request->Data() << L"\"";
                this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
            }));
        });
    }, Concurrency::task_continuation_context::use_synchronous_execution());
}

Det här beteendet gäller för alla sockets- och WebSockets-klasser i Windows. Networking.Sockets-namnrymd. Men scenarier på klientsidan lagrar vanligtvis socketar i medlemsvariabler, så problemet är främst relevant för scenariot StreamSocketListener.ConnectionReceived, så som illustreras ovan.

Skapa en grundläggande UDP-socketklient och -server

En UDP-socket (User Datagram Protocol) liknar en TCP-socket eftersom den även tillhandahåller nätverksdataöverföringar på låg nivå i båda riktningarna. Men även om en TCP-socket är för långlivade anslutningar är en UDP-socket för program där en upprättad anslutning inte krävs. Eftersom UDP-socketar inte underhåller anslutningen på båda slutpunkterna är de en snabb och enkel lösning för nätverk mellan fjärrdatorer. Men UDP-socketar säkerställer inte integriteten för nätverkspaketen eller ens om paketen tar sig till fjärrmålet alls. Så din app måste vara utformad för att tolerera det. Några exempel på program som använder UDP-socketar är lokal nätverksidentifiering och lokala chattklienter.

För att demonstrera grundläggande UDP-åtgärder visar exempelkoden nedan klassen DatagramSocket som används för att både skicka och ta emot data via UDP för att bilda en ekoklient och server. Skapa ett nytt projekt och placera både klienten och serverkoden nedan i samma projekt. Precis som för en TCP-socket måste du deklarera appfunktionen Privata nätverk (klient och server).

En ekoklient och en ekoserver med UDP-socketar

Skapa en DatagramSocket för att spela rollen som ekoserver, binda den till ett specifikt portnummer, lyssna efter ett inkommande UDP-meddelande och upprepa det igen. Händelsen DatagramSocket.MessageReceived utlöses när ett meddelande tas emot i socketen.

Skapa en annan DatagramSocket för att spela rollen som ekoklient, binda den till ett specifikt portnummer, skicka ett UDP-meddelande och ta emot ett svar.

Skapa en ny sida med namnet DatagramSocketPage. Placera XAML-markering i DatagramSocketPage.xamloch placera imperativkoden i DatagramSocketPage klassen.

<Grid Background="{ThemeResource ApplicationPageBackgroundThemeBrush}">
    <Grid.RowDefinitions>
        <RowDefinition Height="Auto"/>
        <RowDefinition Height="*"/>
    </Grid.RowDefinitions>

    <StackPanel>
        <TextBlock Margin="9.6,0" Style="{StaticResource TitleTextBlockStyle}" Text="UDP socket example"/>
        <TextBlock Margin="7.2,0,0,0" Style="{StaticResource HeaderTextBlockStyle}" Text="DatagramSocket"/>
    </StackPanel>

    <Grid Grid.Row="1">
        <Grid.RowDefinitions>
            <RowDefinition/>
            <RowDefinition/>
        </Grid.RowDefinitions>
        <Grid.ColumnDefinitions>
            <ColumnDefinition Width="*"/>
            <ColumnDefinition Width="*"/>
        </Grid.ColumnDefinitions>
        <TextBlock Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="client"/>
        <ListBox x:Name="clientListBox" Grid.Row="1" Margin="9.6"/>
        <TextBlock Grid.Column="1" Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="server"/>
        <ListBox x:Name="serverListBox" Grid.Column="1" Grid.Row="1" Margin="9.6"/>
    </Grid>
</Grid>

// Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
// For this example, we'll choose different arbitrary port numbers for client and server, since both will be running on the same machine.
static string ClientPortNumber = "1336";
static string ServerPortNumber = "1337";

protected override void OnNavigatedTo(NavigationEventArgs e)
{
    this.StartServer();
    this.StartClient();
}

private async void StartServer()
{
    try
    {
        var serverDatagramSocket = new Windows.Networking.Sockets.DatagramSocket();

        // The ConnectionReceived event is raised when connections are received.
        serverDatagramSocket.MessageReceived += ServerDatagramSocket_MessageReceived;

        this.serverListBox.Items.Add("server is about to bind...");

        // Start listening for incoming UDP datagrams on the specified port. You can specify any port that's not currently in use.
        await serverDatagramSocket.BindServiceNameAsync(DatagramSocketPage.ServerPortNumber);

        this.serverListBox.Items.Add(string.Format("server is bound to port number {0}", DatagramSocketPage.ServerPortNumber));
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.serverListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

private async void ServerDatagramSocket_MessageReceived(Windows.Networking.Sockets.DatagramSocket sender, Windows.Networking.Sockets.DatagramSocketMessageReceivedEventArgs args)
{
    string request;
    using (DataReader dataReader = args.GetDataReader())
    {
        request = dataReader.ReadString(dataReader.UnconsumedBufferLength).Trim();
    }

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add(string.Format("server received the request: \"{0}\"", request)));

    // Echo the request back as the response.
    using (Stream outputStream = (await sender.GetOutputStreamAsync(args.RemoteAddress, DatagramSocketPage.ClientPortNumber)).AsStreamForWrite())
    {
        using (var streamWriter = new StreamWriter(outputStream))
        {
            await streamWriter.WriteLineAsync(request);
            await streamWriter.FlushAsync();
        }
    }

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add(string.Format("server sent back the response: \"{0}\"", request)));

    sender.Dispose();

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add("server closed its socket"));
}

private async void StartClient()
{
    try
    {
        // Create the DatagramSocket and establish a connection to the echo server.
        var clientDatagramSocket = new Windows.Networking.Sockets.DatagramSocket();

        clientDatagramSocket.MessageReceived += ClientDatagramSocket_MessageReceived;

        // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
        var hostName = new Windows.Networking.HostName("localhost");

        this.clientListBox.Items.Add("client is about to bind...");

        await clientDatagramSocket.BindServiceNameAsync(DatagramSocketPage.ClientPortNumber);

        this.clientListBox.Items.Add(string.Format("client is bound to port number {0}", DatagramSocketPage.ClientPortNumber));

        // Send a request to the echo server.
        string request = "Hello, World!";
        using (var serverDatagramSocket = new Windows.Networking.Sockets.DatagramSocket())
        {
            using (Stream outputStream = (await serverDatagramSocket.GetOutputStreamAsync(hostName, DatagramSocketPage.ServerPortNumber)).AsStreamForWrite())
            {
                using (var streamWriter = new StreamWriter(outputStream))
                {
                    await streamWriter.WriteLineAsync(request);
                    await streamWriter.FlushAsync();
                }
            }
        }

        this.clientListBox.Items.Add(string.Format("client sent the request: \"{0}\"", request));
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.clientListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

private async void ClientDatagramSocket_MessageReceived(Windows.Networking.Sockets.DatagramSocket sender, Windows.Networking.Sockets.DatagramSocketMessageReceivedEventArgs args)
{
    string response;
    using (DataReader dataReader = args.GetDataReader())
    {
        response = dataReader.ReadString(dataReader.UnconsumedBufferLength).Trim();
    }

    DispatcherQueue.TryEnqueue(() => this.clientListBox.Items.Add(string.Format("client received the response: \"{0}\"", response)));

    sender.Dispose();

    DispatcherQueue.TryEnqueue(() => this.clientListBox.Items.Add("client closed its socket"));
}

#include <winrt/Windows.Foundation.h>
#include <winrt/Windows.Networking.Sockets.h>
#include <winrt/Windows.Storage.Streams.h>
#include <winrt/Microsoft.UI.Dispatching.h>
#include <winrt/Microsoft.UI.Xaml.Navigation.h>
#include <sstream>

using namespace winrt;
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Microsoft::UI::Dispatching;
using namespace Microsoft::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::DatagramSocket m_clientDatagramSocket;
    Windows::Networking::Sockets::DatagramSocket m_serverDatagramSocket;

public:
    void OnNavigatedTo(NavigationEventArgs const& /* e */)
    {
        StartServer();
        StartClient();
    }

private:
    IAsyncAction StartServer()
    {
        try
        {
            // The ConnectionReceived event is raised when connections are received.
            m_serverDatagramSocket.MessageReceived({ this, &DatagramSocketPage::ServerDatagramSocket_MessageReceived });

            serverListBox().Items().Append(winrt::box_value(L"server is about to bind..."));

            // Start listening for incoming UDP datagrams on the specified port. You can specify any port that's not currently in use.
            co_await m_serverDatagramSocket.BindServiceNameAsync(L"1337");
            serverListBox().Items().Append(winrt::box_value(L"server is bound to port number 1337"));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

    IAsyncAction ServerDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket sender, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs args)
    {
        DataReader dataReader{ args.GetDataReader() };
        winrt::hstring request{ dataReader.ReadString(dataReader.UnconsumedBufferLength()) };

        serverListBox().DispatcherQueue().TryEnqueue([=]()
        {
            std::wstringstream wstringstream;
            wstringstream << L"server received the request: \"" << request.c_str() << L"\"";
            serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
        });

        // Echo the request back as the response.
        IOutputStream outputStream = co_await sender.GetOutputStreamAsync(args.RemoteAddress(), L"1336");
        DataWriter dataWriter{ outputStream };
        dataWriter.WriteString(request);

        co_await dataWriter.StoreAsync();
        dataWriter.DetachStream();

        serverListBox().DispatcherQueue().TryEnqueue([=]()
        {
            std::wstringstream wstringstream;
            wstringstream << L"server sent back the response: \"" << request.c_str() << L"\"";
            serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));

            m_serverDatagramSocket = nullptr;

            serverListBox().Items().Append(winrt::box_value(L"server closed its socket"));
        });
    }

    IAsyncAction StartClient()
    {
        try
        {
            m_clientDatagramSocket.MessageReceived({ this, &DatagramSocketPage::ClientDatagramSocket_MessageReceived });

            // Establish a connection to the echo server.
            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            Windows::Networking::HostName hostName{ L"localhost" };

            clientListBox().Items().Append(winrt::box_value(L"client is about to bind..."));

            co_await m_clientDatagramSocket.BindServiceNameAsync(L"1336");
            clientListBox().Items().Append(winrt::box_value(L"client is bound to port number 1336"));

            // Send a request to the echo server.
            IOutputStream outputStream = co_await m_clientDatagramSocket.GetOutputStreamAsync(hostName, L"1337");

            winrt::hstring request{ L"Hello, World!" };
            DataWriter dataWriter{ outputStream };
            dataWriter.WriteString(request);
            co_await dataWriter.StoreAsync();
            dataWriter.DetachStream();

            std::wstringstream wstringstream;
            wstringstream << L"client sent the request: \"" << request.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

    void ClientDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket const& /* sender */, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs const& args)
    {
        DataReader dataReader{ args.GetDataReader() };
        winrt::hstring response{ dataReader.ReadString(dataReader.UnconsumedBufferLength()) };
        clientListBox().DispatcherQueue().TryEnqueue([=]()
        {
            std::wstringstream wstringstream;
            wstringstream << L"client received the response: \"" << response.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
        });

        m_clientDatagramSocket = nullptr;

        clientListBox().DispatcherQueue().TryEnqueue([=]()
        {
            clientListBox().Items().Append(winrt::box_value(L"client closed its socket"));
        });
    }

#include <ppltasks.h>
#include <sstream>
...
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Core;
using namespace Windows::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::DatagramSocket^ clientDatagramSocket;
    Windows::Networking::Sockets::DatagramSocket^ serverDatagramSocket;

protected:
    virtual void OnNavigatedTo(NavigationEventArgs^ e) override
    {
        this->StartServer();
        this->StartClient();
    }

private:
    void StartServer()
    {
        try
        {
            this->serverDatagramSocket = ref new Windows::Networking::Sockets::DatagramSocket();

            // The ConnectionReceived event is raised when connections are received.
            this->serverDatagramSocket->MessageReceived += ref new TypedEventHandler<Windows::Networking::Sockets::DatagramSocket^, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^>(this, &DatagramSocketPage::ServerDatagramSocket_MessageReceived);

            this->serverListBox->Items->Append(L"server is about to bind...");

            // Start listening for incoming UDP datagrams on the specified port. You can specify any port that's not currently in use.
            Concurrency::create_task(this->serverDatagramSocket->BindServiceNameAsync("1337")).then(
                [=]
            {
                this->serverListBox->Items->Append(L"server is bound to port number 1337");
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

    void ServerDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket^ sender, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^ args)
    {
        DataReader^ dataReader = args->GetDataReader();
        Platform::String^ request = dataReader->ReadString(dataReader->UnconsumedBufferLength);
        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
            [=]
        {
            std::wstringstream wstringstream;
            wstringstream << L"server received the request: \"" << request->Data() << L"\"";
            this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
        }));

        // Echo the request back as the response.
        Concurrency::create_task(sender->GetOutputStreamAsync(args->RemoteAddress, "1336")).then(
            [=](IOutputStream^ outputStream)
        {
            auto dataWriter = ref new DataWriter(outputStream);
            dataWriter->WriteString(request);
            Concurrency::create_task(dataWriter->StoreAsync()).then(
                [=](unsigned int)
            {
                dataWriter->DetachStream();

                this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                    [=]()
                {
                    std::wstringstream wstringstream;
                    wstringstream << L"server sent back the response: \"" << request->Data() << L"\"";
                    this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));

                    delete this->serverDatagramSocket;
                    this->serverDatagramSocket = nullptr;

                    this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->serverListBox->Items->Append(L"server closed its socket"); }));
                }));
            });
        });
    }

    void StartClient()
    {
        try
        {
            // Create the DatagramSocket and establish a connection to the echo server.
            this->clientDatagramSocket = ref new Windows::Networking::Sockets::DatagramSocket();

            this->clientDatagramSocket->MessageReceived += ref new TypedEventHandler<Windows::Networking::Sockets::DatagramSocket^, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^>(this, &DatagramSocketPage::ClientDatagramSocket_MessageReceived);

            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            auto hostName = ref new Windows::Networking::HostName(L"localhost");

            this->clientListBox->Items->Append(L"client is about to bind...");

            Concurrency::create_task(this->clientDatagramSocket->BindServiceNameAsync("1336")).then(
                [=]
            {
                this->clientListBox->Items->Append(L"client is bound to port number 1336");
            });

            // Send a request to the echo server.
            auto serverDatagramSocket = ref new Windows::Networking::Sockets::DatagramSocket();
            Concurrency::create_task(serverDatagramSocket->GetOutputStreamAsync(hostName, "1337")).then(
                [=](IOutputStream^ outputStream)
            {
                auto request = ref new Platform::String(L"Hello, World!");
                auto dataWriter = ref new DataWriter(outputStream);
                dataWriter->WriteString(request);
                Concurrency::create_task(dataWriter->StoreAsync()).then(
                    [=](unsigned int)
                {
                    dataWriter->DetachStream();
                    std::wstringstream wstringstream;
                    wstringstream << L"client sent the request: \"" << request->Data() << L"\"";
                    this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
                });

            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

    void ClientDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket^ sender, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^ args)
    {
        DataReader^ dataReader = args->GetDataReader();
        Platform::String^ response = dataReader->ReadString(dataReader->UnconsumedBufferLength);
        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
            [=]
        {
            std::wstringstream wstringstream;
            wstringstream << L"client received the response: \"" << response->Data() << L"\"";
            this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
        }));

        delete this->clientDatagramSocket;
        this->clientDatagramSocket = nullptr;

        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->clientListBox->Items->Append(L"client closed its socket"); }));
    }

Bakgrundsoperationer och socketmäklaren

Du kan använda socketbroker och utlösare för kontrollkanaler för att säkerställa att appen tar emot anslutningar eller data via socketar på rätt sätt när den inte körs i förgrunden. Mer information finns i Nätverkskommunikation i bakgrunden.

Batchskickade sändningar

När du skriver till strömmen som är associerad med en socket sker en övergång från användarläge (din kod) till kernelläge (där nätverksstacken finns). Om du skriver till många buffertar samtidigt leder dessa upprepade växlingar till betydande overhead. Batchbearbetning av dina sändningar är ett sätt att skicka flera databuffertar tillsammans och undvika den kostnaden. Det är särskilt användbart om din app utför VoIP, VPN eller andra uppgifter som innebär att flytta mycket data så effektivt som möjligt.

Det här avsnittet visar ett par batchbaserade sändningstekniker som du kan använda med en StreamSocket eller en ansluten DatagramSocket.

För att få en utgångspunkt ska vi se hur man skickar ett stort antal buffertar ineffektivt. Här är en minimal demo med hjälp av en StreamSocket.

protected override async void OnNavigatedTo(NavigationEventArgs e)
{
    var streamSocketListener = new Windows.Networking.Sockets.StreamSocketListener();
    streamSocketListener.ConnectionReceived += this.StreamSocketListener_ConnectionReceived;
    await streamSocketListener.BindServiceNameAsync("1337");

    var streamSocket = new Windows.Networking.Sockets.StreamSocket();
    await streamSocket.ConnectAsync(new Windows.Networking.HostName("localhost"), "1337");
    this.SendMultipleBuffersInefficiently(streamSocket, "Hello, World!");
    //this.BatchedSendsCSharpOnly(streamSocket, "Hello, World!");
    //this.BatchedSendsAnyUWPLanguage(streamSocket, "Hello, World!");
}

private async void StreamSocketListener_ConnectionReceived(Windows.Networking.Sockets.StreamSocketListener sender, Windows.Networking.Sockets.StreamSocketListenerConnectionReceivedEventArgs args)
{
    using (var dataReader = new DataReader(args.Socket.InputStream))
    {
        dataReader.InputStreamOptions = InputStreamOptions.Partial;
        while (true)
        {
            await dataReader.LoadAsync(256);
            if (dataReader.UnconsumedBufferLength == 0) break;
            IBuffer requestBuffer = dataReader.ReadBuffer(dataReader.UnconsumedBufferLength);
            string request = Windows.Security.Cryptography.CryptographicBuffer.ConvertBinaryToString(Windows.Security.Cryptography.BinaryStringEncoding.Utf8, requestBuffer);
            Debug.WriteLine(string.Format("server received the request: \"{0}\"", request));
        }
    }
}

// This implementation incurs kernel transition overhead for each packet written.
private async void SendMultipleBuffersInefficiently(Windows.Networking.Sockets.StreamSocket streamSocket, string message)
{
    var packetsToSend = new List<IBuffer>();
    for (int count = 0; count < 5; ++count) { packetsToSend.Add(Windows.Security.Cryptography.CryptographicBuffer.ConvertStringToBinary(message, Windows.Security.Cryptography.BinaryStringEncoding.Utf8)); }

    foreach (IBuffer packet in packetsToSend)
    {
        await streamSocket.OutputStream.WriteAsync(packet);
    }
}

#include <winrt/Windows.Foundation.h>
#include <winrt/Windows.Networking.Sockets.h>
#include <winrt/Windows.Security.Cryptography.h>
#include <winrt/Windows.Storage.Streams.h>
#include <winrt/Microsoft.UI.Dispatching.h>
#include <winrt/Microsoft.UI.Xaml.Navigation.h>
#include <sstream>

using namespace winrt;
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Microsoft::UI::Dispatching;
using namespace Microsoft::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener m_streamSocketListener;
    Windows::Networking::Sockets::StreamSocket m_streamSocket;

public:
    IAsyncAction OnNavigatedTo(NavigationEventArgs /* e */)
    {
        m_streamSocketListener.ConnectionReceived({ this, &BatchedSendsPage::OnConnectionReceived });
        co_await m_streamSocketListener.BindServiceNameAsync(L"1337");

        co_await m_streamSocket.ConnectAsync(Windows::Networking::HostName{ L"localhost" }, L"1337");
        SendMultipleBuffersInefficientlyAsync(L"Hello, World!");
        //BatchedSendsAnyUWPLanguageAsync(L"Hello, World!");
    }

private:
    IAsyncAction OnConnectionReceived(Windows::Networking::Sockets::StreamSocketListener const& /* sender */, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs const& args)
    {
        DataReader dataReader{ args.Socket().InputStream() };
        dataReader.InputStreamOptions(Windows::Storage::Streams::InputStreamOptions::Partial);

        while (true)
        {
            unsigned int bytesLoaded = co_await dataReader.LoadAsync(256);
            if (bytesLoaded == 0) break;
            winrt::hstring message{ dataReader.ReadString(bytesLoaded) };
            ::OutputDebugString(message.c_str());
        }
    }

    // This implementation incurs kernel transition overhead for each packet written.
    IAsyncAction SendMultipleBuffersInefficientlyAsync(winrt::hstring message)
    {
        co_await winrt::resume_background();

        std::vector< IBuffer > packetsToSend;
        for (unsigned int count = 0; count < 5; ++count)
        {
            packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
        }

        for (auto const& element : packetsToSend)
        {
            m_streamSocket.OutputStream().WriteAsync(element).get();
        }
    }

#include <ppltasks.h>
#include <sstream>
...
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Core;
using namespace Windows::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener^ streamSocketListener;
    Windows::Networking::Sockets::StreamSocket^ streamSocket;

protected:
    virtual void OnNavigatedTo(NavigationEventArgs^ e) override
    {
        this->streamSocketListener = ref new Windows::Networking::Sockets::StreamSocketListener();
        streamSocketListener->ConnectionReceived += ref new TypedEventHandler<Windows::Networking::Sockets::StreamSocketListener^, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^>(this, &BatchedSendsPage::StreamSocketListener_ConnectionReceived);
        Concurrency::create_task(this->streamSocketListener->BindServiceNameAsync(L"1337")).then(
            [=]
        {
            this->streamSocket = ref new Windows::Networking::Sockets::StreamSocket();
            Concurrency::create_task(this->streamSocket->ConnectAsync(ref new Windows::Networking::HostName(L"localhost"), L"1337")).then(
                [=](Concurrency::task< void >)
            {
                this->SendMultipleBuffersInefficiently(L"Hello, World!");
                // this->BatchedSendsAnyUWPLanguage(L"Hello, World!");
            }, Concurrency::task_continuation_context::use_synchronous_execution());
        });
    }

private:
    void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
    {
        auto dataReader = ref new DataReader(args->Socket->InputStream);
        dataReader->InputStreamOptions = Windows::Storage::Streams::InputStreamOptions::Partial;
        this->ReceiveStringRecurse(dataReader, args->Socket);
    }

    void ReceiveStringRecurse(DataReader^ dataReader, Windows::Networking::Sockets::StreamSocket^ streamSocket)
    {
        Concurrency::create_task(dataReader->LoadAsync(256)).then(
            [this, dataReader, streamSocket](unsigned int bytesLoaded)
        {
            if (bytesLoaded == 0) return;
            Platform::String^ message = dataReader->ReadString(bytesLoaded);
            ::OutputDebugString(message->Data());
            this->ReceiveStringRecurse(dataReader, streamSocket);
        });
    }

    // This implementation incurs kernel transition overhead for each packet written.
    void SendMultipleBuffersInefficiently(Platform::String^ message)
    {
        std::vector< IBuffer^ > packetsToSend{};
        for (unsigned int count = 0; count < 5; ++count)
        {
            packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
        }

        for (auto element : packetsToSend)
        {
            Concurrency::create_task(this->streamSocket->OutputStream->WriteAsync(element)).wait();
        }
    }

Det här första exemplet på en effektivare teknik är bara lämpligt om du använder C#. Ändra OnNavigatedTo så att den anropar BatchedSendsCSharpOnly i stället för SendMultipleBuffersInefficiently eller SendMultipleBuffersInefficientlyAsync.

// A C#-only technique for batched sends.
private async void BatchedSendsCSharpOnly(Windows.Networking.Sockets.StreamSocket streamSocket, string message)
{
    var packetsToSend = new List<IBuffer>();
    for (int count = 0; count < 5; ++count) { packetsToSend.Add(Windows.Security.Cryptography.CryptographicBuffer.ConvertStringToBinary(message, Windows.Security.Cryptography.BinaryStringEncoding.Utf8)); }

    var pendingTasks = new System.Threading.Tasks.Task[packetsToSend.Count];

    for (int index = 0; index < packetsToSend.Count; ++index)
    {
        // track all pending writes as tasks, but don't wait on one before beginning the next.
        pendingTasks[index] = streamSocket.OutputStream.WriteAsync(packetsToSend[index]).AsTask();
        // Don't modify any buffer's contents until the pending writes are complete.
    }

    // Wait for all of the pending writes to complete.
    System.Threading.Tasks.Task.WaitAll(pendingTasks);
}

Nästa exempel är lämpligt för alla UWP-språk, inte bara för C#. Den förlitar sig på beteendet i StreamSocket.OutputStream och DatagramSocket.OutputStream som batchar skickar tillsammans. Tekniken anropar FlushAsync på den utdataströmmen som från och med Windows 10 garanterat endast returneras när alla åtgärder i utdataströmmen har slutförts.

// An implementation of batched sends suitable for any UWP language.
private async void BatchedSendsAnyUWPLanguage(Windows.Networking.Sockets.StreamSocket streamSocket, string message)
{
    var packetsToSend = new List<IBuffer>();
    for (int count = 0; count < 5; ++count) { packetsToSend.Add(Windows.Security.Cryptography.CryptographicBuffer.ConvertStringToBinary(message, Windows.Security.Cryptography.BinaryStringEncoding.Utf8)); }

    var pendingWrites = new IAsyncOperationWithProgress<uint, uint>[packetsToSend.Count];

    for (int index = 0; index < packetsToSend.Count; ++index)
    {
        // track all pending writes as tasks, but don't wait on one before beginning the next.
        pendingWrites[index] = streamSocket.OutputStream.WriteAsync(packetsToSend[index]);
        // Don't modify any buffer's contents until the pending writes are complete.
    }

    // Wait for all of the pending writes to complete. This step enables batched sends on the output stream.
    await streamSocket.OutputStream.FlushAsync();
}

// An implementation of batched sends suitable for any UWP language.
IAsyncAction BatchedSendsAnyUWPLanguageAsync(winrt::hstring message)
{
    std::vector< IBuffer > packetsToSend{};
    std::vector< IAsyncOperationWithProgress< unsigned int, unsigned int > > pendingWrites{};
    for (unsigned int count = 0; count < 5; ++count)
    {
        packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
    }

    for (auto const& element : packetsToSend)
    {
        // track all pending writes as tasks, but don't wait on one before beginning the next.
        pendingWrites.push_back(m_streamSocket.OutputStream().WriteAsync(element));
        // Don't modify any buffer's contents until the pending writes are complete.
    }

    // Wait for all of the pending writes to complete. This step enables batched sends on the output stream.
    co_await m_streamSocket.OutputStream().FlushAsync();
}

private:
    // An implementation of batched sends suitable for any UWP language.
    void BatchedSendsAnyUWPLanguage(Platform::String^ message)
    {
        std::vector< IBuffer^ > packetsToSend{};
        std::vector< IAsyncOperationWithProgress< unsigned int, unsigned int >^ >pendingWrites{};
        for (unsigned int count = 0; count < 5; ++count)
        {
            packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
        }

        for (auto element : packetsToSend)
        {
            // track all pending writes as tasks, but don't wait on one before beginning the next.
            pendingWrites.push_back(this->streamSocket->OutputStream->WriteAsync(element));
            // Don't modify any buffer's contents until the pending writes are complete.
        }

        // Wait for all of the pending writes to complete. This step enables batched sends on the output stream.
        Concurrency::create_task(this->streamSocket->OutputStream->FlushAsync());
    }

Det finns några viktiga begränsningar som åläggs genom att använda batchbaserade sändningar i koden.

  • Du kan inte ändra innehållet i de IBuffer-instanser som skrivs förrän den asynkrona skrivningen är klar.
  • FlushAsync-mönstret fungerar bara på StreamSocket.OutputStream och DatagramSocket.OutputStream.
  • FlushAsync-mönstret fungerar bara i Windows 10 och framåt.
  • I andra fall använder du Task.WaitAll i stället för FlushAsync-mönstret .

Portdelning för DatagramSocket

Du kan konfigurera en DatagramSocket att samexistera med andra Win32- eller UWP multicast-socketar som är bundna till samma adress/port. Det gör du genom att ange DatagramSocketControl.MulticastOnly till true innan du binder eller ansluter socketen. Du kommer åt en instans av DatagramSocketControl från själva DatagramSocket-objektet via dess datagramSocket.Control-egenskap .

Tillhandahålla ett klientcertifikat med klassen StreamSocket

StreamSocket stöder användning av SSL/TLS för att autentisera servern som klientappen pratar med. I vissa fall måste klientappen autentisera sig till servern med hjälp av ett SSL/TLS-klientcertifikat. Du kan ange ett klientcertifikat med egenskapen StreamSocketControl.ClientCertificate innan du binder eller ansluter socketen (det måste anges innan handskakningen SSL/TLS startas). Du kommer åt en instans av StreamSocketControl från själva StreamSocket-objektet via egenskapen StreamSocket.Control . Om servern begär klientcertifikatet svarar Windows med det klientcertifikat som du angav.

Använd en åsidosatt version av StreamSocket.ConnectAsync där du anger en SocketProtectionLevel, som visas i det här minimala kodexemplet.

Important

Som du ser i kommentaren i kodexemplen nedan måste projektet deklarera funktionen sharedUserCertificates för att koden ska fungera.

// For this code to work, you need at least one certificate to be present in the user MY certificate store.
// Plugging a smartcard into a smartcard reader connected to your PC will achieve that.
// Also, your project needs to declare the sharedUserCertificates app capability.
var certificateQuery = new Windows.Security.Cryptography.Certificates.CertificateQuery();
certificateQuery.StoreName = "MY";
IReadOnlyList<Windows.Security.Cryptography.Certificates.Certificate> certificates = await Windows.Security.Cryptography.Certificates.CertificateStores.FindAllAsync(certificateQuery);
if (certificates.Count > 0)
{
    streamSocket.Control.ClientCertificate = certificates[0];
    await streamSocket.ConnectAsync(hostName, "1337", Windows.Networking.Sockets.SocketProtectionLevel.Tls12);
}

// For this code to work, you need at least one certificate to be present in the user MY certificate store.
// Plugging a smartcard into a smartcard reader connected to your PC will achieve that.
// Also, your project needs to declare the sharedUserCertificates app capability.
Windows::Security::Cryptography::Certificates::CertificateQuery certificateQuery;
certificateQuery.StoreName(L"MY");
IVectorView< Windows::Security::Cryptography::Certificates::Certificate > certificates = co_await Windows::Security::Cryptography::Certificates::CertificateStores::FindAllAsync(certificateQuery);

if (certificates.Size() > 0)
{
    m_streamSocket.Control().ClientCertificate(certificates.GetAt(0));
    co_await m_streamSocket.ConnectAsync(Windows::Networking::HostName{ L"localhost" }, L"1337", Windows::Networking::Sockets::SocketProtectionLevel::Tls12);
    ...
}

// For this code to work, you need at least one certificate to be present in the user MY certificate store.
// Plugging a smartcard into a smartcard reader connected to your PC will achieve that.
// Also, your project needs to declare the sharedUserCertificates app capability.
auto certificateQuery = ref new Windows::Security::Cryptography::Certificates::CertificateQuery();
certificateQuery->StoreName = L"MY";
Concurrency::create_task(Windows::Security::Cryptography::Certificates::CertificateStores::FindAllAsync(certificateQuery)).then(
    [=](IVectorView< Windows::Security::Cryptography::Certificates::Certificate^ >^ certificates)
{
    if (certificates->Size > 0)
    {
        this->streamSocket->Control->ClientCertificate = certificates->GetAt(0);
        Concurrency::create_task(this->streamSocket->ConnectAsync(ref new Windows::Networking::HostName(L"localhost"), L"1337", Windows::Networking::Sockets::SocketProtectionLevel::Tls12)).then(
            [=]
        {
            ...
        });
    }
});

Hantering av undantag

Ett fel som uppstår vid en DatagramSocket-, StreamSocket- eller StreamSocketListener-åtgärd returneras som ett HRESULT-värde. Du kan skicka HRESULT-värdet till metoden SocketError.GetStatus för att konvertera det till ett SocketErrorStatus-uppräkningsvärde .

De flesta SocketErrorStatus-uppräkningsvärden motsvarar ett fel som returneras av den interna Windows sockets-åtgärden. Din app kan växla till SocketErrorStatus-uppräkningsvärden för att ändra appens beteende beroende på orsaken till undantaget.

För parameterverifieringsfel kan du använda HRESULT från undantaget för att lära dig mer detaljerad information om felet. Möjliga HRESULT-värden visas i Winerror.h, som finns i SDK-installationen (till exempel i mappen C:\Program Files (x86)\Windows Kits\10\Include\<VERSION>\shared). Vid de flesta fel vid parametervalidering returneras HRESULT-värdet E_INVALIDARG.

HostName-konstruktorn kan utlösa ett undantag om den angivna strängen inte är ett giltigt värdnamn. Den innehåller till exempel tecken som inte är tillåtna, vilket sannolikt är om värdnamnet skrivs in i din app av användaren. Skapa ett HostName i ett try/catch-block. På så sätt kan appen meddela användaren om ett undantag och begära ett nytt värdnamn.

Viktiga API:er

Samples

  • Last updated on