Sockets réseau

Les sockets sont une technologie de transfert de données de bas niveau au-dessus de laquelle de nombreux protocoles réseau sont implémentés. Windows propose des classes de socket TCP et UDP pour les applications client-serveur ou homologue, que les connexions soient durables ou qu’une connexion établie n’est pas nécessaire.

Cette rubrique porte sur l’utilisation des classes de sockets Windows qui se trouvent dans l’espace de noms Windows.Networking.Sockets. Mais vous pouvez également utiliser Windows Sockets 2 (Winsock) dans une application Windows.

Note

en conséquence de l'isolation réseau, Windows interdit l'établissement d'une connexion de socket (Sockets ou WinSock) entre deux applications Windows s'exécutant sur le même ordinateur ; que ce soit via l'adresse de bouclage locale (127.0.0.1) ou en spécifiant explicitement l'adresse IP locale. Pour plus d’informations sur les mécanismes par lesquels Windows applications peuvent communiquer entre elles, consultez la communication app-à-application.

Créer un client et un serveur de socket TCP de base

Un socket TCP (Transmission Control Protocol) fournit des transferts de données réseau de bas niveau dans les deux sens pour les connexions qui sont durables. Les sockets TCP sont la fonctionnalité sous-jacente utilisée par la plupart des protocoles réseau utilisés sur Internet. Pour illustrer les opérations TCP de base, l’exemple de code ci-dessous montre un StreamSocket et un StreamSocketListener envoyant et en recevant des données via TCP pour former un client et un serveur echo.

Pour commencer par le plus petit nombre possible de parties mobiles , et pour contourner les problèmes d’isolation réseau pour le présent, créez un projet et placez le client et le code serveur ci-dessous dans le même projet.

Vous devez déclarer une fonctionnalité d’application dans votre projet. Ouvrez le fichier source du manifeste du package d’application (le Package.appxmanifest fichier) et, sous l’onglet Fonctionnalités, consultez Réseaux privés (client &serveur) . Voici à quoi cela ressemble dans le balisage Package.appxmanifest.

<Capability Name="privateNetworkClientServer" />

Au lieu de privateNetworkClientServer, vous pouvez indiquer internetClientServer si vous vous connectez sur Internet. StreamSocket et StreamSocketListener ont besoin d’une ou d’une autre de ces fonctionnalités d’application pour être déclarées.

Un client et un serveur echo, à l’aide de sockets TCP

Construisez un StreamSocketListener et commencez à écouter les connexions TCP entrantes. L’événement StreamSocketListener.ConnectionReceived est déclenché chaque fois qu’un client établit une connexion avec StreamSocketListener.

Construisez également un StreamSocket, établissez une connexion au serveur, envoyez une demande et recevez une réponse.

Créez une page nommée StreamSocketAndListenerPage. Placez le balisage XAML dans StreamSocketAndListenerPage.xaml, et placez le code impératif à l’intérieur de la StreamSocketAndListenerPage classe.

<Grid Background="{ThemeResource ApplicationPageBackgroundThemeBrush}">
    <Grid.RowDefinitions>
        <RowDefinition Height="Auto"/>
        <RowDefinition Height="*"/>
    </Grid.RowDefinitions>

    <StackPanel>
        <TextBlock Margin="9.6,0" Style="{StaticResource TitleTextBlockStyle}" Text="TCP socket example"/>
        <TextBlock Margin="7.2,0,0,0" Style="{StaticResource HeaderTextBlockStyle}" Text="StreamSocket &amp; StreamSocketListener"/>
    </StackPanel>

    <Grid Grid.Row="1">
        <Grid.RowDefinitions>
            <RowDefinition/>
            <RowDefinition/>
        </Grid.RowDefinitions>
        <Grid.ColumnDefinitions>
            <ColumnDefinition Width="*"/>
            <ColumnDefinition Width="*"/>
        </Grid.ColumnDefinitions>
        <TextBlock Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="client"/>
        <ListBox x:Name="clientListBox" Grid.Row="1" Margin="9.6"/>
        <TextBlock Grid.Column="1" Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="server"/>
        <ListBox x:Name="serverListBox" Grid.Column="1" Grid.Row="1" Margin="9.6"/>
    </Grid>
</Grid>

// Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
// For this example, we'll choose an arbitrary port number.
static string PortNumber = "1337";

protected override void OnNavigatedTo(NavigationEventArgs e)
{
    this.StartServer();
    this.StartClient();
}

private async void StartServer()
{
    try
    {
        var streamSocketListener = new Windows.Networking.Sockets.StreamSocketListener();

        // The ConnectionReceived event is raised when connections are received.
        streamSocketListener.ConnectionReceived += this.StreamSocketListener_ConnectionReceived;

        // Start listening for incoming TCP connections on the specified port. You can specify any port that's not currently in use.
        await streamSocketListener.BindServiceNameAsync(StreamSocketAndListenerPage.PortNumber);

        this.serverListBox.Items.Add("server is listening...");
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.serverListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

private async void StreamSocketListener_ConnectionReceived(Windows.Networking.Sockets.StreamSocketListener sender, Windows.Networking.Sockets.StreamSocketListenerConnectionReceivedEventArgs args)
{
    string request;
    using (var streamReader = new StreamReader(args.Socket.InputStream.AsStreamForRead()))
    {
        request = await streamReader.ReadLineAsync();
    }

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add(string.Format("server received the request: \"{0}\"", request)));

    // Echo the request back as the response.
    using (Stream outputStream = args.Socket.OutputStream.AsStreamForWrite())
    {
        using (var streamWriter = new StreamWriter(outputStream))
        {
            await streamWriter.WriteLineAsync(request);
            await streamWriter.FlushAsync();
        }
    }

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add(string.Format("server sent back the response: \"{0}\"", request)));

    sender.Dispose();

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add("server closed its socket"));
}

private async void StartClient()
{
    try
    {
        // Create the StreamSocket and establish a connection to the echo server.
        using (var streamSocket = new Windows.Networking.Sockets.StreamSocket())
        {
            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            var hostName = new Windows.Networking.HostName("localhost");

            this.clientListBox.Items.Add("client is trying to connect...");

            await streamSocket.ConnectAsync(hostName, StreamSocketAndListenerPage.PortNumber);

            this.clientListBox.Items.Add("client connected");

            // Send a request to the echo server.
            string request = "Hello, World!";
            using (Stream outputStream = streamSocket.OutputStream.AsStreamForWrite())
            {
                using (var streamWriter = new StreamWriter(outputStream))
                {
                    await streamWriter.WriteLineAsync(request);
                    await streamWriter.FlushAsync();
                }
            }

            this.clientListBox.Items.Add(string.Format("client sent the request: \"{0}\"", request));

            // Read data from the echo server.
            string response;
            using (Stream inputStream = streamSocket.InputStream.AsStreamForRead())
            {
                using (StreamReader streamReader = new StreamReader(inputStream))
                {
                    response = await streamReader.ReadLineAsync();
                }
            }

            this.clientListBox.Items.Add(string.Format("client received the response: \"{0}\" ", response));
        }

        this.clientListBox.Items.Add("client closed its socket");
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.clientListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

#include <winrt/Windows.Foundation.h>
#include <winrt/Windows.Networking.Sockets.h>
#include <winrt/Windows.Storage.Streams.h>
#include <winrt/Microsoft.UI.Dispatching.h>
#include <winrt/Microsoft.UI.Xaml.Navigation.h>
#include <sstream>

using namespace winrt;
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Microsoft::UI::Dispatching;
using namespace Microsoft::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener m_streamSocketListener;
    Windows::Networking::Sockets::StreamSocket m_streamSocket;

public:
    void OnNavigatedTo(NavigationEventArgs const& /* e */)
    {
        StartServer();
        StartClient();
    }

private:
    IAsyncAction StartServer()
    {
        try
        {
            // The ConnectionReceived event is raised when connections are received.
            m_streamSocketListener.ConnectionReceived({ this, &StreamSocketAndListenerPage::OnConnectionReceived });

            // Start listening for incoming TCP connections on the specified port. You can specify any port that's not currently in use.
            // Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
            // For this example, we'll choose an arbitrary port number.
            co_await m_streamSocketListener.BindServiceNameAsync(L"1337");
            serverListBox().Items().Append(winrt::box_value(L"server is listening..."));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

    IAsyncAction OnConnectionReceived(Windows::Networking::Sockets::StreamSocketListener /* sender */, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs args)
    {
        try
        {
            auto socket{ args.Socket() }; // Keep the socket referenced, and alive.
            DataReader dataReader{ socket.InputStream() };

            unsigned int bytesLoaded = co_await dataReader.LoadAsync(sizeof(unsigned int));

            unsigned int stringLength = dataReader.ReadUInt32();
            bytesLoaded = co_await dataReader.LoadAsync(stringLength);
            winrt::hstring request = dataReader.ReadString(bytesLoaded);

            serverListBox().DispatcherQueue().TryEnqueue([=]()
            {
                std::wstringstream wstringstream;
                wstringstream << L"server received the request: \"" << request.c_str() << L"\"";
                serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
            });

            // Echo the request back as the response.
            DataWriter dataWriter{ socket.OutputStream() };
            dataWriter.WriteUInt32(request.size());
            dataWriter.WriteString(request);
            co_await dataWriter.StoreAsync();
            dataWriter.DetachStream();

            serverListBox().DispatcherQueue().TryEnqueue([=]()
            {
                std::wstringstream wstringstream;
                wstringstream << L"server sent back the response: \"" << request.c_str() << L"\"";
                serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
            });

            m_streamSocketListener = nullptr;

            serverListBox().DispatcherQueue().TryEnqueue([=]()
            {
                serverListBox().Items().Append(winrt::box_value(L"server closed its socket"));
            });
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().DispatcherQueue().TryEnqueue([=]()
            {
                serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
            });
        }
    }

    IAsyncAction StartClient()
    {
        try
        {
            // Establish a connection to the echo server.

            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            Windows::Networking::HostName hostName{ L"localhost" };

            clientListBox().Items().Append(winrt::box_value(L"client is trying to connect..."));

            co_await m_streamSocket.ConnectAsync(hostName, L"1337");
            clientListBox().Items().Append(winrt::box_value(L"client connected"));

            // Send a request to the echo server.
            DataWriter dataWriter{ m_streamSocket.OutputStream() };
            winrt::hstring request{ L"Hello, World!" };
            dataWriter.WriteUInt32(request.size());
            dataWriter.WriteString(request);

            co_await dataWriter.StoreAsync();

            std::wstringstream wstringstream;
            wstringstream << L"client sent the request: \"" << request.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));

            co_await dataWriter.FlushAsync();
            dataWriter.DetachStream();

            // Read data from the echo server.
            DataReader dataReader{ m_streamSocket.InputStream() };
            unsigned int bytesLoaded = co_await dataReader.LoadAsync(sizeof(unsigned int));
            unsigned int stringLength = dataReader.ReadUInt32();
            bytesLoaded = co_await dataReader.LoadAsync(stringLength);
            winrt::hstring response{ dataReader.ReadString(bytesLoaded) };

            wstringstream.str(L"");
            wstringstream << L"client received the response: \"" << response.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));

            m_streamSocket = nullptr;

            clientListBox().Items().Append(winrt::box_value(L"client closed its socket"));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

#include <ppltasks.h>
#include <sstream>
...
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Core;
using namespace Windows::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener^ streamSocketListener;
    Windows::Networking::Sockets::StreamSocket^ streamSocket;

protected:
    virtual void OnNavigatedTo(NavigationEventArgs^ e) override
    {
        this->StartServer();
        this->StartClient();
    }

private:
    void StartServer()
    {
        try
        {
            this->streamSocketListener = ref new Windows::Networking::Sockets::StreamSocketListener();

            // The ConnectionReceived event is raised when connections are received.
            streamSocketListener->ConnectionReceived += ref new TypedEventHandler<Windows::Networking::Sockets::StreamSocketListener^, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^>(this, &StreamSocketAndListenerPage::StreamSocketListener_ConnectionReceived);

            // Start listening for incoming TCP connections on the specified port. You can specify any port that's not currently in use.
            // Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
            // For this example, we'll choose an arbitrary port number.
            Concurrency::create_task(streamSocketListener->BindServiceNameAsync(L"1337")).then(
                [=]
            {
                this->serverListBox->Items->Append(L"server is listening...");
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

    void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
    {
        try
        {
            auto dataReader = ref new DataReader(args->Socket->InputStream);

            Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
                [=](unsigned int bytesLoaded)
            {
                unsigned int stringLength = dataReader->ReadUInt32();
                Concurrency::create_task(dataReader->LoadAsync(stringLength)).then(
                    [=](unsigned int bytesLoaded)
                {
                    Platform::String^ request = dataReader->ReadString(bytesLoaded);
                    this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                        [=]
                    {
                        std::wstringstream wstringstream;
                        wstringstream << L"server received the request: \"" << request->Data() << L"\"";
                        this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
                    }));

                    // Echo the request back as the response.
                    auto dataWriter = ref new DataWriter(args->Socket->OutputStream);
                    dataWriter->WriteUInt32(request->Length());
                    dataWriter->WriteString(request);
                    Concurrency::create_task(dataWriter->StoreAsync()).then(
                        [=](unsigned int)
                    {
                        dataWriter->DetachStream();

                        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                            [=]()
                        {
                            std::wstringstream wstringstream;
                            wstringstream << L"server sent back the response: \"" << request->Data() << L"\"";
                            this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
                        }));

                        delete this->streamSocketListener;
                        this->streamSocketListener = nullptr;

                        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->serverListBox->Items->Append(L"server closed its socket"); }));
                    });
                });
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message); }));
        }
    }

    void StartClient()
    {
        try
        {
            // Create the StreamSocket and establish a connection to the echo server.
            this->streamSocket = ref new Windows::Networking::Sockets::StreamSocket();

            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            auto hostName = ref new Windows::Networking::HostName(L"localhost");

            this->clientListBox->Items->Append(L"client is trying to connect...");

            Concurrency::create_task(this->streamSocket->ConnectAsync(hostName, L"1337")).then(
                [=](Concurrency::task< void >)
            {
                this->clientListBox->Items->Append(L"client connected");

                // Send a request to the echo server.
                auto dataWriter = ref new DataWriter(this->streamSocket->OutputStream);
                auto request = ref new Platform::String(L"Hello, World!");
                dataWriter->WriteUInt32(request->Length());
                dataWriter->WriteString(request);

                Concurrency::create_task(dataWriter->StoreAsync()).then(
                    [=](Concurrency::task< unsigned int >)
                {
                    std::wstringstream wstringstream;
                    wstringstream << L"client sent the request: \"" << request->Data() << L"\"";
                    this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));

                    Concurrency::create_task(dataWriter->FlushAsync()).then(
                        [=](Concurrency::task< bool >)
                    {
                        dataWriter->DetachStream();

                        // Read data from the echo server.
                        auto dataReader = ref new DataReader(this->streamSocket->InputStream);
                        Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
                            [=](unsigned int bytesLoaded)
                        {
                            unsigned int stringLength = dataReader->ReadUInt32();
                            Concurrency::create_task(dataReader->LoadAsync(stringLength)).then(
                                [=](unsigned int bytesLoaded)
                            {
                                Platform::String^ response = dataReader->ReadString(bytesLoaded);
                                this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                                    [=]
                                {
                                    std::wstringstream wstringstream;
                                    wstringstream << L"client received the response: \"" << response->Data() << L"\"";
                                    this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));

                                    delete this->streamSocket;
                                    this->streamSocket = nullptr;

                                    this->clientListBox->Items->Append(L"client closed its socket");
                                }));
                            });
                        });
                    });
                });
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

Références aux StreamSockets dans les continuations PPL C++ (s’applique principalement à C++/CX)

Note

Si vous utilisez les coroutines C++/WinRT et que vous passez des paramètres par valeur, ce problème ne s’applique pas. Pour obtenir des recommandations de passage de paramètres, consultez Les opérations simultanées et asynchrones avec C++/WinRT.

Un StreamSocket reste actif tant qu'il existe une lecture/écriture active sur son flux d'entrée/sortie (prenons par exemple le gestionnaire d'événements StreamSocketListenerConnectionReceivedEventArgs.Socket auquel vous avez accès dans votre gestionnaire d'événements StreamSocketListener.ConnectionReceived). Lorsque vous appelez DataReader.LoadAsync (ou ReadAsync/WriteAsync/StoreAsync), cela contient une référence au socket (via le flux d’entrée du socket) jusqu’à ce que le gestionnaire d’événements Completed (le cas échéant) de LoadAsync soit exécuté.

Par défaut, la bibliothèque de modèles parallèles (PPL) ne planifie pas les continuations de tâches inline. En d’autres termes, l’ajout d’une tâche de continuation (avec task::then()) ne garantit pas que la tâche de continuation s’exécute en ligne en tant que gestionnaire d’achèvement.

void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
{
    auto dataReader = ref new DataReader(args->Socket->InputStream);
    Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
        [=](unsigned int bytesLoaded)
    {
        // Work in here isn't guaranteed to execute inline as the completion handler of the LoadAsync.
    });
}

Du point de vue du StreamSocket, l’exécution du gestionnaire d’achèvement est terminée (et le socket peut être libéré) avant que le corps de continuation ne s’exécute. Par conséquent, pour éviter que votre socket ne soit libéré si vous souhaitez l’utiliser à l’intérieur de cette continuation, vous devez soit faire directement référence au socket (via une capture de lambda) et l’utiliser, soit y faire indirectement référence (en continuant à accéder à args->Socket à l’intérieur des continuations), soit forcer les tâches de continuation à être exécutées inline. Vous pouvez voir la première technique (capture lambda) en action dans l’exemple StreamSocket. Le code C++/CX dans la section Générer un client de socket TCP de base et le serveur ci-dessus utilise la deuxième technique : elle renvoie la requête en tant que réponse et accède à args->Socket partir de l’une des continuations les plus internes.

La troisième technique est adaptée lorsque vous ne renvoyez pas de réponse en retour. Vous utilisez l’option task_continuation_context::use_synchronous_execution() pour forcer PPL à exécuter le corps de continuation inline. Voici un exemple de code montrant comment le faire.

void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
{
    auto dataReader = ref new DataReader(args->Socket->InputStream);

    Concurrency::create_task(dataReader->LoadAsync(sizeof(unsigned int))).then(
        [=](unsigned int bytesLoaded)
    {
        unsigned int messageLength = dataReader->ReadUInt32();
        Concurrency::create_task(dataReader->LoadAsync(messageLength)).then(
            [=](unsigned int bytesLoaded)
        {
            Platform::String^ request = dataReader->ReadString(bytesLoaded);
            this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                [=]
            {
                std::wstringstream wstringstream;
                wstringstream << L"server received the request: \"" << request->Data() << L"\"";
                this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
            }));
        });
    }, Concurrency::task_continuation_context::use_synchronous_execution());
}

Ce comportement s’applique à toutes les classes de sockets et de WebSockets de l’espace de noms Windows.Networking.Sockets. Toutefois, les scénarios côté client stockent généralement des sockets dans des variables membres. Par conséquent, le problème s’applique le plus au scénario StreamSocketListener.ConnectionReceived , comme illustré ci-dessus.

Créer un client et un serveur de socket UDP de base

Un socket UDP (User Datagram Protocol) est similaire à un socket TCP dans lequel il fournit également des transferts de données réseau de bas niveau dans les deux sens. Toutefois, alors qu’un socket TCP est destiné aux connexions de longue durée, un socket UDP est destiné aux applications où une connexion établie n’est pas nécessaire. Étant donné que les sockets UDP ne conservent pas la connexion sur les deux points de terminaison, ils sont une solution rapide et simple pour la mise en réseau entre les machines distantes. Toutefois, les sockets UDP ne garantissent ni l’intégrité des paquets réseau ni même que les paquets atteignent la destination distante. Votre application doit donc être conçue pour tolérer cela. Voici quelques exemples d’applications qui utilisent des sockets UDP : la découverte de réseaux locaux et les clients de conversation locale.

Pour illustrer les opérations UDP de base, l’exemple de code ci-dessous montre la classe DatagramSocket utilisée pour envoyer et recevoir des données via UDP pour former un client d’écho et un serveur. Créez un projet et placez le client et le code serveur ci-dessous dans le même projet. Tout comme pour un socket TCP, vous devez déclarer la fonctionnalité d’application Réseaux privés (client &serveur).

Un client et un serveur echo, à l’aide de sockets UDP

Construisez un DatagramSocket pour jouer le rôle du serveur d’écho, liez-le à un numéro de port spécifique, écoutez un message UDP entrant et renvoyez-le. L’événement DatagramSocket.MessageReceived est déclenché lorsqu’un message est reçu sur le socket.

Construisez un autre DatagramSocket pour jouer le rôle du client echo, liez-le à un numéro de port spécifique, envoyez un message UDP et recevez une réponse.

Créez une page nommée DatagramSocketPage. Placez le balisage XAML dans DatagramSocketPage.xaml, et placez le code impératif à l’intérieur de la DatagramSocketPage classe.

<Grid Background="{ThemeResource ApplicationPageBackgroundThemeBrush}">
    <Grid.RowDefinitions>
        <RowDefinition Height="Auto"/>
        <RowDefinition Height="*"/>
    </Grid.RowDefinitions>

    <StackPanel>
        <TextBlock Margin="9.6,0" Style="{StaticResource TitleTextBlockStyle}" Text="UDP socket example"/>
        <TextBlock Margin="7.2,0,0,0" Style="{StaticResource HeaderTextBlockStyle}" Text="DatagramSocket"/>
    </StackPanel>

    <Grid Grid.Row="1">
        <Grid.RowDefinitions>
            <RowDefinition/>
            <RowDefinition/>
        </Grid.RowDefinitions>
        <Grid.ColumnDefinitions>
            <ColumnDefinition Width="*"/>
            <ColumnDefinition Width="*"/>
        </Grid.ColumnDefinitions>
        <TextBlock Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="client"/>
        <ListBox x:Name="clientListBox" Grid.Row="1" Margin="9.6"/>
        <TextBlock Grid.Column="1" Margin="9.6" Style="{StaticResource SubtitleTextBlockStyle}" Text="server"/>
        <ListBox x:Name="serverListBox" Grid.Column="1" Grid.Row="1" Margin="9.6"/>
    </Grid>
</Grid>

// Every protocol typically has a standard port number. For example, HTTP is typically 80, FTP is 20 and 21, etc.
// For this example, we'll choose different arbitrary port numbers for client and server, since both will be running on the same machine.
static string ClientPortNumber = "1336";
static string ServerPortNumber = "1337";

protected override void OnNavigatedTo(NavigationEventArgs e)
{
    this.StartServer();
    this.StartClient();
}

private async void StartServer()
{
    try
    {
        var serverDatagramSocket = new Windows.Networking.Sockets.DatagramSocket();

        // The ConnectionReceived event is raised when connections are received.
        serverDatagramSocket.MessageReceived += ServerDatagramSocket_MessageReceived;

        this.serverListBox.Items.Add("server is about to bind...");

        // Start listening for incoming UDP datagrams on the specified port. You can specify any port that's not currently in use.
        await serverDatagramSocket.BindServiceNameAsync(DatagramSocketPage.ServerPortNumber);

        this.serverListBox.Items.Add(string.Format("server is bound to port number {0}", DatagramSocketPage.ServerPortNumber));
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.serverListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

private async void ServerDatagramSocket_MessageReceived(Windows.Networking.Sockets.DatagramSocket sender, Windows.Networking.Sockets.DatagramSocketMessageReceivedEventArgs args)
{
    string request;
    using (DataReader dataReader = args.GetDataReader())
    {
        request = dataReader.ReadString(dataReader.UnconsumedBufferLength).Trim();
    }

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add(string.Format("server received the request: \"{0}\"", request)));

    // Echo the request back as the response.
    using (Stream outputStream = (await sender.GetOutputStreamAsync(args.RemoteAddress, DatagramSocketPage.ClientPortNumber)).AsStreamForWrite())
    {
        using (var streamWriter = new StreamWriter(outputStream))
        {
            await streamWriter.WriteLineAsync(request);
            await streamWriter.FlushAsync();
        }
    }

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add(string.Format("server sent back the response: \"{0}\"", request)));

    sender.Dispose();

    DispatcherQueue.TryEnqueue(() => this.serverListBox.Items.Add("server closed its socket"));
}

private async void StartClient()
{
    try
    {
        // Create the DatagramSocket and establish a connection to the echo server.
        var clientDatagramSocket = new Windows.Networking.Sockets.DatagramSocket();

        clientDatagramSocket.MessageReceived += ClientDatagramSocket_MessageReceived;

        // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
        var hostName = new Windows.Networking.HostName("localhost");

        this.clientListBox.Items.Add("client is about to bind...");

        await clientDatagramSocket.BindServiceNameAsync(DatagramSocketPage.ClientPortNumber);

        this.clientListBox.Items.Add(string.Format("client is bound to port number {0}", DatagramSocketPage.ClientPortNumber));

        // Send a request to the echo server.
        string request = "Hello, World!";
        using (var serverDatagramSocket = new Windows.Networking.Sockets.DatagramSocket())
        {
            using (Stream outputStream = (await serverDatagramSocket.GetOutputStreamAsync(hostName, DatagramSocketPage.ServerPortNumber)).AsStreamForWrite())
            {
                using (var streamWriter = new StreamWriter(outputStream))
                {
                    await streamWriter.WriteLineAsync(request);
                    await streamWriter.FlushAsync();
                }
            }
        }

        this.clientListBox.Items.Add(string.Format("client sent the request: \"{0}\"", request));
    }
    catch (Exception ex)
    {
        Windows.Networking.Sockets.SocketErrorStatus webErrorStatus = Windows.Networking.Sockets.SocketError.GetStatus(ex.GetBaseException().HResult);
        this.clientListBox.Items.Add(webErrorStatus.ToString() != "Unknown" ? webErrorStatus.ToString() : ex.Message);
    }
}

private async void ClientDatagramSocket_MessageReceived(Windows.Networking.Sockets.DatagramSocket sender, Windows.Networking.Sockets.DatagramSocketMessageReceivedEventArgs args)
{
    string response;
    using (DataReader dataReader = args.GetDataReader())
    {
        response = dataReader.ReadString(dataReader.UnconsumedBufferLength).Trim();
    }

    DispatcherQueue.TryEnqueue(() => this.clientListBox.Items.Add(string.Format("client received the response: \"{0}\"", response)));

    sender.Dispose();

    DispatcherQueue.TryEnqueue(() => this.clientListBox.Items.Add("client closed its socket"));
}

#include <winrt/Windows.Foundation.h>
#include <winrt/Windows.Networking.Sockets.h>
#include <winrt/Windows.Storage.Streams.h>
#include <winrt/Microsoft.UI.Dispatching.h>
#include <winrt/Microsoft.UI.Xaml.Navigation.h>
#include <sstream>

using namespace winrt;
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Microsoft::UI::Dispatching;
using namespace Microsoft::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::DatagramSocket m_clientDatagramSocket;
    Windows::Networking::Sockets::DatagramSocket m_serverDatagramSocket;

public:
    void OnNavigatedTo(NavigationEventArgs const& /* e */)
    {
        StartServer();
        StartClient();
    }

private:
    IAsyncAction StartServer()
    {
        try
        {
            // The ConnectionReceived event is raised when connections are received.
            m_serverDatagramSocket.MessageReceived({ this, &DatagramSocketPage::ServerDatagramSocket_MessageReceived });

            serverListBox().Items().Append(winrt::box_value(L"server is about to bind..."));

            // Start listening for incoming UDP datagrams on the specified port. You can specify any port that's not currently in use.
            co_await m_serverDatagramSocket.BindServiceNameAsync(L"1337");
            serverListBox().Items().Append(winrt::box_value(L"server is bound to port number 1337"));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

    IAsyncAction ServerDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket sender, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs args)
    {
        DataReader dataReader{ args.GetDataReader() };
        winrt::hstring request{ dataReader.ReadString(dataReader.UnconsumedBufferLength()) };

        serverListBox().DispatcherQueue().TryEnqueue([=]()
        {
            std::wstringstream wstringstream;
            wstringstream << L"server received the request: \"" << request.c_str() << L"\"";
            serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
        });

        // Echo the request back as the response.
        IOutputStream outputStream = co_await sender.GetOutputStreamAsync(args.RemoteAddress(), L"1336");
        DataWriter dataWriter{ outputStream };
        dataWriter.WriteString(request);

        co_await dataWriter.StoreAsync();
        dataWriter.DetachStream();

        serverListBox().DispatcherQueue().TryEnqueue([=]()
        {
            std::wstringstream wstringstream;
            wstringstream << L"server sent back the response: \"" << request.c_str() << L"\"";
            serverListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));

            m_serverDatagramSocket = nullptr;

            serverListBox().Items().Append(winrt::box_value(L"server closed its socket"));
        });
    }

    IAsyncAction StartClient()
    {
        try
        {
            m_clientDatagramSocket.MessageReceived({ this, &DatagramSocketPage::ClientDatagramSocket_MessageReceived });

            // Establish a connection to the echo server.
            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            Windows::Networking::HostName hostName{ L"localhost" };

            clientListBox().Items().Append(winrt::box_value(L"client is about to bind..."));

            co_await m_clientDatagramSocket.BindServiceNameAsync(L"1336");
            clientListBox().Items().Append(winrt::box_value(L"client is bound to port number 1336"));

            // Send a request to the echo server.
            IOutputStream outputStream = co_await m_clientDatagramSocket.GetOutputStreamAsync(hostName, L"1337");

            winrt::hstring request{ L"Hello, World!" };
            DataWriter dataWriter{ outputStream };
            dataWriter.WriteString(request);
            co_await dataWriter.StoreAsync();
            dataWriter.DetachStream();

            std::wstringstream wstringstream;
            wstringstream << L"client sent the request: \"" << request.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
        }
        catch (winrt::hresult_error const& ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus{ Windows::Networking::Sockets::SocketError::GetStatus(ex.to_abi()) };
            serverListBox().Items().Append(webErrorStatus != Windows::Networking::Sockets::SocketErrorStatus::Unknown ? winrt::box_value(winrt::to_hstring((int32_t)webErrorStatus)) : winrt::box_value(winrt::to_hstring(ex.to_abi())));
        }
    }

    void ClientDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket const& /* sender */, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs const& args)
    {
        DataReader dataReader{ args.GetDataReader() };
        winrt::hstring response{ dataReader.ReadString(dataReader.UnconsumedBufferLength()) };
        clientListBox().DispatcherQueue().TryEnqueue([=]()
        {
            std::wstringstream wstringstream;
            wstringstream << L"client received the response: \"" << response.c_str() << L"\"";
            clientListBox().Items().Append(winrt::box_value(wstringstream.str().c_str()));
        });

        m_clientDatagramSocket = nullptr;

        clientListBox().DispatcherQueue().TryEnqueue([=]()
        {
            clientListBox().Items().Append(winrt::box_value(L"client closed its socket"));
        });
    }

#include <ppltasks.h>
#include <sstream>
...
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Core;
using namespace Windows::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::DatagramSocket^ clientDatagramSocket;
    Windows::Networking::Sockets::DatagramSocket^ serverDatagramSocket;

protected:
    virtual void OnNavigatedTo(NavigationEventArgs^ e) override
    {
        this->StartServer();
        this->StartClient();
    }

private:
    void StartServer()
    {
        try
        {
            this->serverDatagramSocket = ref new Windows::Networking::Sockets::DatagramSocket();

            // The ConnectionReceived event is raised when connections are received.
            this->serverDatagramSocket->MessageReceived += ref new TypedEventHandler<Windows::Networking::Sockets::DatagramSocket^, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^>(this, &DatagramSocketPage::ServerDatagramSocket_MessageReceived);

            this->serverListBox->Items->Append(L"server is about to bind...");

            // Start listening for incoming UDP datagrams on the specified port. You can specify any port that's not currently in use.
            Concurrency::create_task(this->serverDatagramSocket->BindServiceNameAsync("1337")).then(
                [=]
            {
                this->serverListBox->Items->Append(L"server is bound to port number 1337");
            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

    void ServerDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket^ sender, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^ args)
    {
        DataReader^ dataReader = args->GetDataReader();
        Platform::String^ request = dataReader->ReadString(dataReader->UnconsumedBufferLength);
        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
            [=]
        {
            std::wstringstream wstringstream;
            wstringstream << L"server received the request: \"" << request->Data() << L"\"";
            this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
        }));

        // Echo the request back as the response.
        Concurrency::create_task(sender->GetOutputStreamAsync(args->RemoteAddress, "1336")).then(
            [=](IOutputStream^ outputStream)
        {
            auto dataWriter = ref new DataWriter(outputStream);
            dataWriter->WriteString(request);
            Concurrency::create_task(dataWriter->StoreAsync()).then(
                [=](unsigned int)
            {
                dataWriter->DetachStream();

                this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
                    [=]()
                {
                    std::wstringstream wstringstream;
                    wstringstream << L"server sent back the response: \"" << request->Data() << L"\"";
                    this->serverListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));

                    delete this->serverDatagramSocket;
                    this->serverDatagramSocket = nullptr;

                    this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->serverListBox->Items->Append(L"server closed its socket"); }));
                }));
            });
        });
    }

    void StartClient()
    {
        try
        {
            // Create the DatagramSocket and establish a connection to the echo server.
            this->clientDatagramSocket = ref new Windows::Networking::Sockets::DatagramSocket();

            this->clientDatagramSocket->MessageReceived += ref new TypedEventHandler<Windows::Networking::Sockets::DatagramSocket^, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^>(this, &DatagramSocketPage::ClientDatagramSocket_MessageReceived);

            // The server hostname that we will be establishing a connection to. In this example, the server and client are in the same process.
            auto hostName = ref new Windows::Networking::HostName(L"localhost");

            this->clientListBox->Items->Append(L"client is about to bind...");

            Concurrency::create_task(this->clientDatagramSocket->BindServiceNameAsync("1336")).then(
                [=]
            {
                this->clientListBox->Items->Append(L"client is bound to port number 1336");
            });

            // Send a request to the echo server.
            auto serverDatagramSocket = ref new Windows::Networking::Sockets::DatagramSocket();
            Concurrency::create_task(serverDatagramSocket->GetOutputStreamAsync(hostName, "1337")).then(
                [=](IOutputStream^ outputStream)
            {
                auto request = ref new Platform::String(L"Hello, World!");
                auto dataWriter = ref new DataWriter(outputStream);
                dataWriter->WriteString(request);
                Concurrency::create_task(dataWriter->StoreAsync()).then(
                    [=](unsigned int)
                {
                    dataWriter->DetachStream();
                    std::wstringstream wstringstream;
                    wstringstream << L"client sent the request: \"" << request->Data() << L"\"";
                    this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
                });

            });
        }
        catch (Platform::Exception^ ex)
        {
            Windows::Networking::Sockets::SocketErrorStatus webErrorStatus = Windows::Networking::Sockets::SocketError::GetStatus(ex->HResult);
            this->serverListBox->Items->Append(webErrorStatus.ToString() != L"Unknown" ? webErrorStatus.ToString() : ex->Message);
        }
    }

    void ClientDatagramSocket_MessageReceived(Windows::Networking::Sockets::DatagramSocket^ sender, Windows::Networking::Sockets::DatagramSocketMessageReceivedEventArgs^ args)
    {
        DataReader^ dataReader = args->GetDataReader();
        Platform::String^ response = dataReader->ReadString(dataReader->UnconsumedBufferLength);
        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler(
            [=]
        {
            std::wstringstream wstringstream;
            wstringstream << L"client received the response: \"" << response->Data() << L"\"";
            this->clientListBox->Items->Append(ref new Platform::String(wstringstream.str().c_str()));
        }));

        delete this->clientDatagramSocket;
        this->clientDatagramSocket = nullptr;

        this->Dispatcher->RunAsync(CoreDispatcherPriority::Normal, ref new DispatchedHandler([=]() {this->clientListBox->Items->Append(L"client closed its socket"); }));
    }

Opérations en arrière-plan et courtier de sockets

Vous pouvez utiliser le répartiteur de sockets et contrôler les déclencheurs de canal pour vous assurer que votre application reçoit correctement des connexions ou des données sur des sockets alors qu’elle n’est pas au premier plan. Pour plus d’informations, consultez Communications réseau en arrière-plan.

Envois par lots

Chaque fois que vous écrivez dans le flux associé à un socket, il y a un passage du mode utilisateur (votre code) au mode noyau (où se situe la pile réseau). Si vous écrivez plusieurs mémoires tampons à la fois, ces transitions répétées sont composées d’une surcharge substantielle. Le traitement par lots de vos envois est un moyen d’envoyer plusieurs mémoires tampons de données ensemble et d’éviter cette surcharge. Il est particulièrement utile si votre application effectue des tâches VoIP, VPN ou autres qui impliquent le déplacement d’un grand nombre de données aussi efficacement que possible.

Cette section illustre quelques techniques d’envoi par lots que vous pouvez utiliser avec un StreamSocket ou un DatagramSocket connecté.

Pour obtenir une base de référence, voyons comment envoyer un grand nombre de mémoires tampons de manière inefficace. Voici une démonstration minimale, à l’aide d’un StreamSocket.

protected override async void OnNavigatedTo(NavigationEventArgs e)
{
    var streamSocketListener = new Windows.Networking.Sockets.StreamSocketListener();
    streamSocketListener.ConnectionReceived += this.StreamSocketListener_ConnectionReceived;
    await streamSocketListener.BindServiceNameAsync("1337");

    var streamSocket = new Windows.Networking.Sockets.StreamSocket();
    await streamSocket.ConnectAsync(new Windows.Networking.HostName("localhost"), "1337");
    this.SendMultipleBuffersInefficiently(streamSocket, "Hello, World!");
    //this.BatchedSendsCSharpOnly(streamSocket, "Hello, World!");
    //this.BatchedSendsAnyUWPLanguage(streamSocket, "Hello, World!");
}

private async void StreamSocketListener_ConnectionReceived(Windows.Networking.Sockets.StreamSocketListener sender, Windows.Networking.Sockets.StreamSocketListenerConnectionReceivedEventArgs args)
{
    using (var dataReader = new DataReader(args.Socket.InputStream))
    {
        dataReader.InputStreamOptions = InputStreamOptions.Partial;
        while (true)
        {
            await dataReader.LoadAsync(256);
            if (dataReader.UnconsumedBufferLength == 0) break;
            IBuffer requestBuffer = dataReader.ReadBuffer(dataReader.UnconsumedBufferLength);
            string request = Windows.Security.Cryptography.CryptographicBuffer.ConvertBinaryToString(Windows.Security.Cryptography.BinaryStringEncoding.Utf8, requestBuffer);
            Debug.WriteLine(string.Format("server received the request: \"{0}\"", request));
        }
    }
}

// This implementation incurs kernel transition overhead for each packet written.
private async void SendMultipleBuffersInefficiently(Windows.Networking.Sockets.StreamSocket streamSocket, string message)
{
    var packetsToSend = new List<IBuffer>();
    for (int count = 0; count < 5; ++count) { packetsToSend.Add(Windows.Security.Cryptography.CryptographicBuffer.ConvertStringToBinary(message, Windows.Security.Cryptography.BinaryStringEncoding.Utf8)); }

    foreach (IBuffer packet in packetsToSend)
    {
        await streamSocket.OutputStream.WriteAsync(packet);
    }
}

#include <winrt/Windows.Foundation.h>
#include <winrt/Windows.Networking.Sockets.h>
#include <winrt/Windows.Security.Cryptography.h>
#include <winrt/Windows.Storage.Streams.h>
#include <winrt/Microsoft.UI.Dispatching.h>
#include <winrt/Microsoft.UI.Xaml.Navigation.h>
#include <sstream>

using namespace winrt;
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Microsoft::UI::Dispatching;
using namespace Microsoft::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener m_streamSocketListener;
    Windows::Networking::Sockets::StreamSocket m_streamSocket;

public:
    IAsyncAction OnNavigatedTo(NavigationEventArgs /* e */)
    {
        m_streamSocketListener.ConnectionReceived({ this, &BatchedSendsPage::OnConnectionReceived });
        co_await m_streamSocketListener.BindServiceNameAsync(L"1337");

        co_await m_streamSocket.ConnectAsync(Windows::Networking::HostName{ L"localhost" }, L"1337");
        SendMultipleBuffersInefficientlyAsync(L"Hello, World!");
        //BatchedSendsAnyUWPLanguageAsync(L"Hello, World!");
    }

private:
    IAsyncAction OnConnectionReceived(Windows::Networking::Sockets::StreamSocketListener const& /* sender */, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs const& args)
    {
        DataReader dataReader{ args.Socket().InputStream() };
        dataReader.InputStreamOptions(Windows::Storage::Streams::InputStreamOptions::Partial);

        while (true)
        {
            unsigned int bytesLoaded = co_await dataReader.LoadAsync(256);
            if (bytesLoaded == 0) break;
            winrt::hstring message{ dataReader.ReadString(bytesLoaded) };
            ::OutputDebugString(message.c_str());
        }
    }

    // This implementation incurs kernel transition overhead for each packet written.
    IAsyncAction SendMultipleBuffersInefficientlyAsync(winrt::hstring message)
    {
        co_await winrt::resume_background();

        std::vector< IBuffer > packetsToSend;
        for (unsigned int count = 0; count < 5; ++count)
        {
            packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
        }

        for (auto const& element : packetsToSend)
        {
            m_streamSocket.OutputStream().WriteAsync(element).get();
        }
    }

#include <ppltasks.h>
#include <sstream>
...
using namespace Windows::Foundation;
using namespace Windows::Storage::Streams;
using namespace Windows::UI::Core;
using namespace Windows::UI::Xaml::Navigation;
...
private:
    Windows::Networking::Sockets::StreamSocketListener^ streamSocketListener;
    Windows::Networking::Sockets::StreamSocket^ streamSocket;

protected:
    virtual void OnNavigatedTo(NavigationEventArgs^ e) override
    {
        this->streamSocketListener = ref new Windows::Networking::Sockets::StreamSocketListener();
        streamSocketListener->ConnectionReceived += ref new TypedEventHandler<Windows::Networking::Sockets::StreamSocketListener^, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^>(this, &BatchedSendsPage::StreamSocketListener_ConnectionReceived);
        Concurrency::create_task(this->streamSocketListener->BindServiceNameAsync(L"1337")).then(
            [=]
        {
            this->streamSocket = ref new Windows::Networking::Sockets::StreamSocket();
            Concurrency::create_task(this->streamSocket->ConnectAsync(ref new Windows::Networking::HostName(L"localhost"), L"1337")).then(
                [=](Concurrency::task< void >)
            {
                this->SendMultipleBuffersInefficiently(L"Hello, World!");
                // this->BatchedSendsAnyUWPLanguage(L"Hello, World!");
            }, Concurrency::task_continuation_context::use_synchronous_execution());
        });
    }

private:
    void StreamSocketListener_ConnectionReceived(Windows::Networking::Sockets::StreamSocketListener^ sender, Windows::Networking::Sockets::StreamSocketListenerConnectionReceivedEventArgs^ args)
    {
        auto dataReader = ref new DataReader(args->Socket->InputStream);
        dataReader->InputStreamOptions = Windows::Storage::Streams::InputStreamOptions::Partial;
        this->ReceiveStringRecurse(dataReader, args->Socket);
    }

    void ReceiveStringRecurse(DataReader^ dataReader, Windows::Networking::Sockets::StreamSocket^ streamSocket)
    {
        Concurrency::create_task(dataReader->LoadAsync(256)).then(
            [this, dataReader, streamSocket](unsigned int bytesLoaded)
        {
            if (bytesLoaded == 0) return;
            Platform::String^ message = dataReader->ReadString(bytesLoaded);
            ::OutputDebugString(message->Data());
            this->ReceiveStringRecurse(dataReader, streamSocket);
        });
    }

    // This implementation incurs kernel transition overhead for each packet written.
    void SendMultipleBuffersInefficiently(Platform::String^ message)
    {
        std::vector< IBuffer^ > packetsToSend{};
        for (unsigned int count = 0; count < 5; ++count)
        {
            packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
        }

        for (auto element : packetsToSend)
        {
            Concurrency::create_task(this->streamSocket->OutputStream->WriteAsync(element)).wait();
        }
    }

Ce premier exemple de technique plus efficace est approprié uniquement si vous utilisez C#. Modifiez OnNavigatedTo pour appeler BatchedSendsCSharpOnly au lieu de SendMultipleBuffersInefficiently ou SendMultipleBuffersInefficientlyAsync.

// A C#-only technique for batched sends.
private async void BatchedSendsCSharpOnly(Windows.Networking.Sockets.StreamSocket streamSocket, string message)
{
    var packetsToSend = new List<IBuffer>();
    for (int count = 0; count < 5; ++count) { packetsToSend.Add(Windows.Security.Cryptography.CryptographicBuffer.ConvertStringToBinary(message, Windows.Security.Cryptography.BinaryStringEncoding.Utf8)); }

    var pendingTasks = new System.Threading.Tasks.Task[packetsToSend.Count];

    for (int index = 0; index < packetsToSend.Count; ++index)
    {
        // track all pending writes as tasks, but don't wait on one before beginning the next.
        pendingTasks[index] = streamSocket.OutputStream.WriteAsync(packetsToSend[index]).AsTask();
        // Don't modify any buffer's contents until the pending writes are complete.
    }

    // Wait for all of the pending writes to complete.
    System.Threading.Tasks.Task.WaitAll(pendingTasks);
}

Cet exemple suivant est approprié pour n’importe quel langage UWP, pas seulement pour C#. Il s’appuie sur le comportement dans StreamSocket.OutputStream et DatagramSocket.OutputStream que les lots envoient ensemble. La technique appelle FlushAsync sur ce flux de sortie qui, à partir de Windows 10, est garantie de retourner uniquement une fois toutes les opérations effectuées sur le flux de sortie.

// An implementation of batched sends suitable for any UWP language.
private async void BatchedSendsAnyUWPLanguage(Windows.Networking.Sockets.StreamSocket streamSocket, string message)
{
    var packetsToSend = new List<IBuffer>();
    for (int count = 0; count < 5; ++count) { packetsToSend.Add(Windows.Security.Cryptography.CryptographicBuffer.ConvertStringToBinary(message, Windows.Security.Cryptography.BinaryStringEncoding.Utf8)); }

    var pendingWrites = new IAsyncOperationWithProgress<uint, uint>[packetsToSend.Count];

    for (int index = 0; index < packetsToSend.Count; ++index)
    {
        // track all pending writes as tasks, but don't wait on one before beginning the next.
        pendingWrites[index] = streamSocket.OutputStream.WriteAsync(packetsToSend[index]);
        // Don't modify any buffer's contents until the pending writes are complete.
    }

    // Wait for all of the pending writes to complete. This step enables batched sends on the output stream.
    await streamSocket.OutputStream.FlushAsync();
}

// An implementation of batched sends suitable for any UWP language.
IAsyncAction BatchedSendsAnyUWPLanguageAsync(winrt::hstring message)
{
    std::vector< IBuffer > packetsToSend{};
    std::vector< IAsyncOperationWithProgress< unsigned int, unsigned int > > pendingWrites{};
    for (unsigned int count = 0; count < 5; ++count)
    {
        packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
    }

    for (auto const& element : packetsToSend)
    {
        // track all pending writes as tasks, but don't wait on one before beginning the next.
        pendingWrites.push_back(m_streamSocket.OutputStream().WriteAsync(element));
        // Don't modify any buffer's contents until the pending writes are complete.
    }

    // Wait for all of the pending writes to complete. This step enables batched sends on the output stream.
    co_await m_streamSocket.OutputStream().FlushAsync();
}

private:
    // An implementation of batched sends suitable for any UWP language.
    void BatchedSendsAnyUWPLanguage(Platform::String^ message)
    {
        std::vector< IBuffer^ > packetsToSend{};
        std::vector< IAsyncOperationWithProgress< unsigned int, unsigned int >^ >pendingWrites{};
        for (unsigned int count = 0; count < 5; ++count)
        {
            packetsToSend.push_back(Windows::Security::Cryptography::CryptographicBuffer::ConvertStringToBinary(message, Windows::Security::Cryptography::BinaryStringEncoding::Utf8));
        }

        for (auto element : packetsToSend)
        {
            // track all pending writes as tasks, but don't wait on one before beginning the next.
            pendingWrites.push_back(this->streamSocket->OutputStream->WriteAsync(element));
            // Don't modify any buffer's contents until the pending writes are complete.
        }

        // Wait for all of the pending writes to complete. This step enables batched sends on the output stream.
        Concurrency::create_task(this->streamSocket->OutputStream->FlushAsync());
    }

Certaines limitations importantes sont imposées à l’aide d’envois par lots dans votre code.

  • Vous ne pouvez pas modifier le contenu des instances IBuffer écrites tant que l’écriture asynchrone n’est pas terminée.
  • Le modèle FlushAsync fonctionne uniquement sur StreamSocket.OutputStream et DatagramSocket.OutputStream.
  • Le modèle FlushAsync fonctionne uniquement dans Windows 10 et versions ultérieures.
  • Dans d’autres cas, utilisez Task.WaitAll au lieu du modèle FlushAsync .

Partage de ports pour DatagramSocket

Vous pouvez configurer un DatagramSocket pour coexister avec d’autres sockets de multidiffusion Win32 ou UWP liés à la même adresse/port. Pour ce faire, définissez DatagramSocketControl.MulticastOnly sur true avant de lier ou de connecter le socket. Vous accédez à une instance de DatagramSocketControl à partir de l’objet DatagramSocket lui-même via sa propriété DatagramSocket.Control .

Fourniture d’un certificat client avec la classe StreamSocket

StreamSocket prend en charge l’utilisation de SSL/TLS pour authentifier le serveur auquel l’application cliente parle. Dans certains cas, l’application cliente doit s’authentifier auprès du serveur à l’aide d’un certificat client SSL/TLS. Vous pouvez fournir un certificat client avec la propriété StreamSocketControl.ClientCertificate avant la liaison ou la connexion du socket (il doit être défini avant le démarrage de l’établissement d’une liaison SSL/TLS). Vous accédez à une instance de StreamSocketControl à partir de l’objet StreamSocket lui-même via sa propriété StreamSocket.Control . Si le serveur demande le certificat client, Windows répond avec le certificat client que vous avez fourni.

Utilisez une surcharge de StreamSocket.ConnectAsync qui accepte un SocketProtectionLevel, comme illustré dans cet exemple de code minimal.

Important

Comme indiqué par le commentaire dans les exemples de code ci-dessous, votre projet doit déclarer la fonctionnalité d’application sharedUserCertificates pour que ce code fonctionne.

// For this code to work, you need at least one certificate to be present in the user MY certificate store.
// Plugging a smartcard into a smartcard reader connected to your PC will achieve that.
// Also, your project needs to declare the sharedUserCertificates app capability.
var certificateQuery = new Windows.Security.Cryptography.Certificates.CertificateQuery();
certificateQuery.StoreName = "MY";
IReadOnlyList<Windows.Security.Cryptography.Certificates.Certificate> certificates = await Windows.Security.Cryptography.Certificates.CertificateStores.FindAllAsync(certificateQuery);
if (certificates.Count > 0)
{
    streamSocket.Control.ClientCertificate = certificates[0];
    await streamSocket.ConnectAsync(hostName, "1337", Windows.Networking.Sockets.SocketProtectionLevel.Tls12);
}

// For this code to work, you need at least one certificate to be present in the user MY certificate store.
// Plugging a smartcard into a smartcard reader connected to your PC will achieve that.
// Also, your project needs to declare the sharedUserCertificates app capability.
Windows::Security::Cryptography::Certificates::CertificateQuery certificateQuery;
certificateQuery.StoreName(L"MY");
IVectorView< Windows::Security::Cryptography::Certificates::Certificate > certificates = co_await Windows::Security::Cryptography::Certificates::CertificateStores::FindAllAsync(certificateQuery);

if (certificates.Size() > 0)
{
    m_streamSocket.Control().ClientCertificate(certificates.GetAt(0));
    co_await m_streamSocket.ConnectAsync(Windows::Networking::HostName{ L"localhost" }, L"1337", Windows::Networking::Sockets::SocketProtectionLevel::Tls12);
    ...
}

// For this code to work, you need at least one certificate to be present in the user MY certificate store.
// Plugging a smartcard into a smartcard reader connected to your PC will achieve that.
// Also, your project needs to declare the sharedUserCertificates app capability.
auto certificateQuery = ref new Windows::Security::Cryptography::Certificates::CertificateQuery();
certificateQuery->StoreName = L"MY";
Concurrency::create_task(Windows::Security::Cryptography::Certificates::CertificateStores::FindAllAsync(certificateQuery)).then(
    [=](IVectorView< Windows::Security::Cryptography::Certificates::Certificate^ >^ certificates)
{
    if (certificates->Size > 0)
    {
        this->streamSocket->Control->ClientCertificate = certificates->GetAt(0);
        Concurrency::create_task(this->streamSocket->ConnectAsync(ref new Windows::Networking::HostName(L"localhost"), L"1337", Windows::Networking::Sockets::SocketProtectionLevel::Tls12)).then(
            [=]
        {
            ...
        });
    }
});

Gestion des exceptions

Une erreur rencontrée sur une opération DatagramSocket, StreamSocket ou StreamSocketListener est retournée en tant que valeur HRESULT . Vous pouvez transmettre cette valeur HRESULT à la méthode SocketError.GetStatus pour la convertir en valeur d’énumération SocketErrorStatus .

La plupart des valeurs d’énumération SocketErrorStatus correspondent à une erreur retournée par l’opération native Windows sockets. Votre application peut activer les valeurs d’énumération SocketErrorStatus pour modifier le comportement de l’application en fonction de la cause de l’exception.

Pour les erreurs de validation de paramètre, vous pouvez utiliser HRESULT à partir de l’exception pour en savoir plus sur l’erreur. Les valeurs HRESULT possibles sont répertoriées Winerror.hdans , qui se trouvent dans votre installation du Kit de développement logiciel (SDK) (par exemple, dans le dossier C:\Program Files (x86)\Windows Kits\10\Include\<VERSION>\shared). Pour la plupart des erreurs de validation de paramètre, HRESULT retourné est E_INVALIDARG.

Le constructeur HostName peut lever une exception si la chaîne passée n’est pas un nom d’hôte valide. Par exemple, il contient des caractères qui ne sont pas autorisés, ce qui est probable si le nom d’hôte est tapé dans votre application par l’utilisateur. Créez un HostName dans un bloc try/catch. De cette façon, si une exception est levée, l’application peut avertir l’utilisateur et demander un nouveau nom d’hôte.

API importantes

Samples

  • Last updated on